Hello Guys!! Do you want to know about the John Deere 8270R Specs, New Price, Review, and Features? Then here in this post, you will get all kinds of information that you want to know about it. I hope it will be useful to you. So let’s check it out.
John Deere 8270R New Price, Specs, Weight, Features
The price of the John Deere 8270R is $347,928 USD. John Deere 8270R Tractor powered by 6-cylinder, in-line, wet-sleeve cylinder liners with four head Diesel engine valves, producing 270HP power at rated rpm 2100.
John Deere 8270R Tractor Key Facts:
- 270 Engine horsepower
- John Deere PowerTech™ 9.0L PSS
- Choice of 16-speed PowerShift, e23™ PowerShift, or Infinitely Variable Transmission
- MFWD, or Independent Link Suspension
- 6-speed PowerShift with APS; e23™ PowerShift with Efficiency Manager; available AutoPowr™ IVT™, Independent Link Suspension,
- 225 hp Rated PTO power and Hydrostatic power-steering with electric pump back-up
- 12,124 kg Maximum lift capacity behind lift points.
John Deere 8270R Specs
ENGINE |
|
| Description | John Deere PowerTech™ PSS 9.0 L (B20 diesel compatible) |
| Engine type | Diesel, in-line, 6-cylinder, wet-sleeve cylinder liners with 4 valves-in-head |
| Engine family | JJDXL09.0308 |
| Rated speed | 2100 rpm |
| Aspiration | Dual series turbocharger with fixed geometry first stage-variable geometry second stage – air-to-air aftercooling and cooled exhaust gas recirculation |
| Emission level | Final Tier 4 |
| After treatment type | DOC/DPF/SCR |
| Displacement | 9 L 549 cu in. |
| Engine performance | |
| Rated power | (97/68EC): 199 kW 270 hp |
| Rated PTO power (hp SAE) | 167 kW 225 hp |
| Power boost | 10 percent |
| Engine peak torque | At 1600 rpm: 1,264 Nm 932 lb-ft |
| PTO torque rise | 40 percent |
Transmission |
|
| Type | Standard: e23 Powershit with Efficiency Manager™ 40K, 40 km/h 26 mph Optional: 16-speed PowerShift 40 km/h e23 Powershift with Efficiency Manager™ 50K, 50 km/h 31 mph John Deere AutoPowr™ IVT™ 40K, 26 mph (0.05-42 km/h) John Deere AutoPowr™ IVT™ 50K, 31 mph (0.05-50 km/h) |
Hydraulic system |
|
| Type | Closed-center, pressure/flow compensated |
| Pump rated output | Standard: 85-cc pump: 227.1 L/min 60 gpm Optional: 85-cc plus 35-cc dual pump: 321 L/min 85 gpm |
| Available flow at a single rear SCV | 0.5 in. couplers: 132 L/min 35 gpm 0.75 in. couplers: 159 L/min 42 gpm |
| Available flow at front SCVs | 96 L/min 25 gpm |
| Number of rear selective control valves (SCVs) | Standard: 0.5 in. ISO couplers: 5 Optional: 0.5 in. ISO Couplers: 5 and 6 available 0.75 in. ISO coupler: 2 |
| SCV control | Electronic |
Rear hitch |
|
| Hitch category (SAE designation) | Standard: Category 3/3N: 6,350 kg (14,000 lb) standard lift at 610 mm behind hitchpoint Optional: Category 3/3N: 8,391 kg (18,500 lb) at 610 mm behind hitchpoint Category 4N/3 9,072 kg (20,000 lb) at 610 mm behind hitchpoint |
| Maximum lift capacity behind lift points | Standard: 12,124 kg (26,729 lb) at 610 mm behind hitchpoint |
| Sensing type | Electrohydraulic |
Drawbar |
|
| Drawbar category | Standard: Category 3 Optional: Category 4 Category 4 with heavy duty support |
| Maximum vertical load | 1,837 kg (4,050 lb) – 2,700 kg (6,000 lb) (dependent on drawbar position) Optional: 2,245 kg 4,950 lb Optional: 4,990 kg 11,000 lb |
Rear power take-off (PTO) |
|
| Type | Independent Standard: 44 mm (1.75 in.) 20-spline, 1,000 rpm Optional: 44 mm (1.75 in.), 20-spline, 1,000 rpm capable of 35 mm (1.375 in.) 540/1000 rpm 44 mm (1.75 in.) 20-spline, 1,000 rpm/1,000E rpm |
| Engine rpm (at rated PTO speeds) | 16-speed PST: 1,000 PTO rpm at 2,003 engine rpm 1,000 ECO PTO rpm at 1,596 engine rpm 540 PTO rpm at 1,817 engine rpm IVT: 1,000 PTO rpm at 2,000 engine rpm 1,000 ECO PTO at 1594 engine rpm 540 PTO rpm at 1,814 engine rpm e23 PST: 1,000 PTO rpm at 1,995 engine rpm 1,000 ECO PTO at 1,590 engine rpm 540 PTO rpm at 1,810 engine rpm |
| Front hitch | |
| Category | Category 3N |
| Standard lift capacity | Category 3N ground engaging front hitch: lift capacity: 5,200 kg 11,464 lb |
| Front power take-off (PTO) | 44 mm (1.75 in) 20 spline, 1,000 rpm 35 mm (1.375 in) 21 spline, 1,000 rpm 5 mm (1.375 in) 6 spline, 1,000 rpm (available dependent on location) |
| PTO speed | 1,000 PTO rpm at 2,000 engine rpm |
Rear axle |
|
| Type | Standard: Rack-and-pinion, double flat, or flange axles Optional: Long, single taper hub: Diameter: 110 x 3010 mm 4.33 x 118.5 in. Optional: Long, dual taper hub: Diameter: 110 x 3010 mm Long, dual taper hub: Diameter: 120 x 3010 mm 4.72 x 118.5 in. Short, double flat axle with single taper hub: Diameter: 120 x 2550 mm 4.72 x 100.4 in. |
| Final drive type | Inboard planetary three pinion |
| Rear differential lock | Full-locking electrohydraulic |
Front axle |
|
| Typ | Standard: 1300 Series MFWD Optional: 1500 Series MFWD ILS |
| Front axle differential lock | 1300 Series MFWD: Limited Slip 1500 Series MFWD: Full-locking electrohydraulic ILS: Full-locking electrohydraulic |
John Deere 8270R Tires |
|
| Wheel tread range | 1300 Series MFWD: 1,524-2,235 mm 60-88 in. 1500 Series MFWD: 1,524-3,657 mm 60-144 in. ILS: 1,524-3,657 mm |
| Turning radius without brakes | 1300 Series with 380/85R34 group 42 tires at 60 in. spacing, 5.4 m 17.7 ft ILS with 380/85R34 group 42 tires at 60 in. spacing, 5.42 m 17.8 ft |
Steering |
|
| Type | Standard: Hydrostatic power-steering with electric pump back-up Optional: ActiveCommand™ Steering (ACS) with electric pump back-up |
Electrical system |
|
| Alternator size | Standard: 200 a |
| Battery options | 12 V |
| Total cold cranking amps | 1850 CCA |
Operator station |
|
| Rollover protective structure, OOS | — |
| Seat | Standard: ComfortCommand™ Optional: ActiveSeat™ |
| Cab suspension | Optional |
| Instructional seat | Standard |
| Display | Standard: 4100 Generation 4 CommandCenter™ with 7 in. display Optional: 4600 Generation 4 CommandCenter™ with 10 in. display |
| Radio | Standard: AM/FM stereo with weatherband, remote controls, auxiliary input jack, four speakers and external antenna |
| Inner cab volume | 3.597 m3 127 cu ft |
| Cab glass area | 6.52 m2 70.18 sq ft |
John Deere 8270R Dimensions & weight |
|
| Wheelbase | MFWD: 3,080 mm 121.3 in. ILS: 3,050 mm 120.1 in. |
| Overall length | 6,636 mm 261.3 in. |
| Drawbar clearance | 376 mm 14.8 in. |
| Front axle center | MFWD: 686 mm 27 in. ILS: 590 mm 23.2 in. |
| Base machine weight | MFWD/PST: 12,680 kg 27,953 lb ILS/e23: 14,270 kg 31,459 lb |
|---|---|
| Maximum ballast level | SAE PTO kW: 88.6 kg SAE PTO hp: 145 lb |
Capacities |
|
| Crankcase oil volume | 1300 MFWD: 25 L 6.6 U.S. gal. 1500 MFWD: 28 L 7.4 U.S. gal. ILS: 27.5 L 7.3 U.S. gal. |
| Fuel tank | Group 47/48: 615 L 162.5 U.S. gal. Group 49: 676 L 178.6 U.S. gal. |
| Diesel exhaust fluid (DEF) tank | 23 L 6 U.S. gal. |
| Cooling system | 32.6 L 8.6 U.S. gal. |
| Transmission-hydraulic system | MFWD: 140 L 37 U.S. gal. ILS: 165 L 43.6 U.S. gal. |
Serviceability |
|
| Interval for engine oil change | 500 hours |
| Interval for hydraulic/transmission oil change | 1,500 hours |
| Interval for engine coolant change | 6,000 hours |
Loaders |
|
| Loader | H480 |
| Lift capacity at full height | 2,486 kg 5469 lb measured at 800 mm ahead of pivot |
| Maximum lift height | 4735 mm 186 in. |
Precision AG |
|
| Guidance | AutoTrac Ready |
| Telematic | Available with JDLink™ hardware, activations, and Ethernet Harnesses (availability dependent upon destination) |
| Remote diagnostics | Available with activated JDLink™ hardware and activations |
Also Check:
- John Deere 8RX 410
- John Deere 8RT 410
- John Deere 8R 410
- John Deere 8RX 370
- John Deere 8R 370
- John Deere 8RX 340
- John Deere 8RT 340
- John Deere 8R 340
- John Deere 8RX 310
That was all about the John Deere 8270R Price, Specs, Review and features. I hope you like this post cause I assure that all kinds of information are genuine and reliable but if you have any query regarding this post, then please comment below in the comment box, I will solve your problem as soon as possible, thanks for visiting our site and stay tuned to our site for more new stuff like this my friends.