MF 8700 Series Tractors Prices, Specifications, Reviews, Features, Overview
The Massey Ferguson 8700 Series (MF8727, MF8730, MF8732, MF8735, MF8737) is our next generation of tractors. They’re highly dependable, no-nonsense, low-maintenance tractors that are built to work the same way you do.
Top Ten New Features of This MS 8700 Series Tractors:
- AGCO POWER 8.4L 6-cylinder engine, simply designed for total fluid efficiency
- Twin turbos provide sustainable torque at low RPMs with quick response
- Engine Power Management system to increase performance
- High-capacity CYCLAIR cooling package that’s 33% more efficient
- Hood styling for improved airflow
- Front 3-point hitch and PTO provide maximum versatility
- Easy-to-read front dash display and ergonomic B-pillar controls
- Light package for better visibility in demanding applications
- Hydraulic system with increased flow
- Front monobloc weight for greater versatility and easy ballast management
Also Check:
- Massey Ferguson 5600 Series Tractors
- Massey Ferguson 8700 Series
- Massey Ferguson 7700 Series
- Massey Ferguson MF 240
- Massey Ferguson 255 Tractor
- Massey Ferguson 240 Tractor
Now let’s check out the Massey Ferguson 8700 Series each single model information:
Massey Ferguson 8727 Tractor
Massey Ferguson 8727 Tractor Key Features
- Engine Model: AGCO POWER™ 8.4L
- Transmission: Dyna-VT™ with Power Management (PM) 31 mph (50 kph)
- Hydraulic System: Closed center load sensing (CCLS)
- Maximum Horsepower: 270HP
- PTO HP: 205HP
- Rear Lift Capacity @ link ends: 26,455lbs
- Fuel Tank Capacity: 630Ltr.
Massey Ferguson 8727 Tractor Price
The Massey Ferguson 8727 Tractor Price is $280,215.
Massey Ferguson 8727 Tractor Specs
| ENGINE PERFORMANCE | |
| Maximum ISO engine HP @ 2,000 engine RPM (kW) | 270 (199) |
| ISO engine HP @ 2,100 rated engine RPM (kW) | 240 (177) |
| PTO HP @ 2,100 rated engine RPM (kW) | 205 (151) |
| Type — standard | AGCO POWER™ 8.4L |
| Number of cylinder | 6 |
| Displacement liters (CID) | 8.4 (514) |
| Aspiration | Twin Turbo Chargers with eWastegate |
| Alternator / battery (standard) | 240 amps / 12 V (twin 120 amp alternators) |
| TRANSMISSION SYSTEM | |
| Type | Dyna-VT™ with Power Management (PM) 31 mph (50 kph) |
| Field speed range | 0.02 – 17 mph Forward and 0.02 – 10 mph Reverse (0.03 – 28 km/h Forward and 0.03 – 16 km/h Reverse) |
| Road speed range | 0.02 – 31 mph Forward and 0.02 – 24 mph Reverse (0.03 – 50 km/h Forward and 0.03 – 38 km/h Reverse) |
| Road speed range — 40 kph — optional | Optional – 0.02 – 30 mph Forward and 0.02 – 24 mph Reverse (0.03 – 40 km/h Forward and 0.03 – 38 km/h Reverse) |
| Speeds forward | Infinite |
| Cruise control speeds | 4 |
| REAR AXLE | |
| 4.33 x 118 in. (110 x 2,999 mm) long axle | Standard |
| 4.33 x 105 in (110 x 2,550 mm) short axle | Optional |
| Differential lock — full-locking, electrohydraulic | Standard |
| FRONT AXLE | |
| 4-wheel drive differential lock | Standard – full-locking, electrohydraulic |
| 4-wheel drive maximum steering angle | 55º |
| 3 POINT HITCH REAR | |
| Category 3/4N Quick Hitch | Standard |
| Maximum lift capacity — At Link Ends lbs. (kg) | 20,345 (9,228) |
| 3-POINT HITCH – FRONT (OPT.) | |
| Category 3 | Standard |
| Maximum lift capacity — At Link Ends lbs. (kg) | 10,970 (4,976) |
| DRAWBAR | |
| Category 3 with drop pin | Standard |
| Category 3 heavy duty with drop pin | Optional |
| Category 4 with drop pin | Optional |
| PTO | |
| Speeds RPM — standard | 1,000 / 1,000E |
| Shaft diameter in. (mm) | 1.75 in. (45 mm) shaft, 20 spline |
| HYDRAULICS | |
| System type | Closed Center Load Sensing (CCLS) |
| Total flow rate US gallon (L) | 54 (205) |
| Maximum pressure PSI (bar) | 2,900 (200) |
| Remote Valves — Standard/Optional | Standard: 4 fingertip controlled valves Optional: 2 additional fingertip controls for a total of 6 auxiliary valves |
| OPERATOR AREA | |
| Cab glass area ft2 (m2) | 67.3 (6.22) |
| Noise level dB(A) | 71 |
| OptiRide Plus hydraulic suspended cab | Standard |
| Operator seat — air suspension | Standard |
| Control Center Display (CCD) | Standard |
| TECHNOLOGY | |
| Auto-Guide 3000 | Standard |
| AgCommand | AgCommand ready standard, subscription optional |
| DIMENSION& WEIGHT* | |
| Wheelbase in. (mm) | 122 (3,100) |
| Overall length-front wt. frame to rear link arms in. (mm) | 218.6 (5,552) |
| Maximum height over cab in. (mm) | 141 (3,584) |
| Approx. shipping weight lbs. (kg) | 23,810 (10,800) |
| Maximum allowable weight lbs. (kg) | 33,070 (15,000) |
| Fuel CAPACITY | |
| Fuel tank capacity US gallon (L) | 166 (630) |
| DEF (AdBlue) usable tank capacity US gallon (L) | 15.8 (60) |
Massey Ferguson 8730 Tractor
Massey Ferguson 8730 Tractor Key Features
- Engine Model: AGCO POWER™ 8.4L
- Transmission: Dyna-VT™ with Power Management (PM) 31 mph (50 kph)
- Hydraulic System: Closed center load sensing (CCLS)
- Maximum Horsepower: 300HP
- PTO HP: 225HP
- Rear Lift Capacity @ link ends: 26,455lbs
- Fuel Tank Capacity: 630Ltr.
Massey Ferguson 8730 Tractor Price
The Massey Ferguson 8730 Tractor Price is $249,500.
Massey Ferguson 8730 Tractor Specs
| ENGINE PERFORMANCE | |
| Maximum ISO engine HP @ 2,000 engine RPM (kW) | 295 (220) |
| ISO engine HP @ 2,100 rated engine RPM (kW) | 265 (198) |
| PTO HP @ 2,100 rated engine RPM (kW) | 225 (168) |
| Type — standard | AGCO POWER™ 8.4L |
| Number of cylinder | 6 |
| Displacement liters (CID) | 8.4 (514) |
| Aspiration | Twin Turbo Chargers with eWastegate |
| Alternator / battery (standard) | 240 amps / 12 V (twin 120 amp alternators) |
| TRANSMISSION SYSTEM | |
| Type | Dyna-VT™ with Power Management (PM) 31 mph (50 kph) |
| Field speed range | 0.02 – 17 mph Forward and 0.02 – 10 mph Reverse (0.03 – 28 km/h Forward and 0.03 – 16 km/h Reverse) |
| Road speed range | 0.02 – 31 mph Forward and 0.02 – 24 mph Reverse (0.03 – 50 km/h Forward and 0.03 – 38 km/h Reverse) |
| Road speed range — 40 kph — optional | Optional – 0.02 – 30 mph Forward and 0.02 – 24 mph Reverse (0.03 – 40 km/h Forward and 0.03 – 38 km/h Reverse) |
| Speeds forward | Infinite |
| Cruise control speeds | 4 |
| REAR AXLE | |
| 4.33 x 118 in. (110 x 2,999 mm) long axle | Standard |
| 4.33 x 105 in (110 x 2,550 mm) short axle | Optional |
| Differential lock — full-locking, electrohydraulic | Standard |
| FRONT AXLE | |
| 4-wheel drive differential lock | Standard – full-locking, electrohydraulic |
| 4-wheel drive maximum steering angle | 55º |
| 3 POINT HITCH REAR | |
| Category 3/4N Quick Hitch | Standard |
| Maximum lift capacity — At Link Ends lbs. (kg) | 20,345 (9,228) |
| 3-POINT HITCH – FRONT (OPT.) | |
| Category 3 | Standard |
| Maximum lift capacity — At Link Ends lbs. (kg) | 10,970 (4,976) |
| DRAWBAR | |
| Category 3 with drop pin | Standard |
| Category 3 heavy duty with drop pin | Optional |
| Category 4 with drop pin | Optional |
| PTO | |
| Speeds RPM — standard | 1,000 / 1,000E |
| Shaft diameter in. (mm) | 1.75 in. (45 mm) shaft, 20 spline |
| HYDRAULICS | |
| System type | Closed Center Load Sensing (CCLS) |
| Total flow rate US gallon (L) | 54 (205) |
| Maximum pressure PSI (bar) | 2,900 (200) |
| Remote Valves — Standard/Optional | Standard: 4 fingertip controlled valves Optional: 2 additional fingertip controls for a total of 6 auxiliary valves |
| OPERATOR AREA | |
| Cab glass area ft2 (m2) | 67.3 (6.22) |
| Noise level dB(A) | 71 |
| OptiRide Plus hydraulic suspended cab | Standard |
| Operator seat — air suspension | Standard |
| Control Center Display (CCD) | Standard |
| TECHNOLOGY | |
| Auto-Guide 3000 | Standard |
| AgCommand | AgCommand ready standard, subscription optional |
| DIMENSION& WEIGHT* | |
| Wheelbase in. (mm) | 122 (3,100) |
| Overall length-front wt. frame to rear link arms in. (mm) | 218.6 (5,552) |
| Maximum height over cab in. (mm) | 141 (3,584) |
| Approx. shipping weight lbs. (kg) | 23,810 (10,800) |
| Maximum allowable weight lbs. (kg) | 33,070 (15,000) |
| Fuel CAPACITY | |
| Fuel tank capacity US gallon (L) | 166 (630) |
| DEF (AdBlue) usable tank capacity US gallon (L) | 15.8 (60) |
Massey Ferguson 8732 Tractor
Massey Ferguson 8732 Tractor Key Features
- Engine Model: AGCO POWER™ 8.4L
- Transmission: Dyna-VT™ with Power Management (PM) 31 mph (50 kph)
- Hydraulic System: Closed center load sensing (CCLS)
- Maximum Horsepower: 320HP
- PTO HP: 250HP
- Rear Lift Capacity @ link ends: 26,455lbs
- Fuel Tank Capacity: 630Ltr.
Massey Ferguson 8732 Tractor Price
The Massey Ferguson 8732 Tractor Price is $264,000.
Massey Ferguson 8732 Tractor Specs
| ENGINE PERFORMANCE | |
| Maximum ISO engine HP @ 2,000 engine RPM (kW) | 320 (239) |
| ISO engine HP @ 2,100 rated engine RPM (kW) | 290 (216) |
| PTO HP @ 2,100 rated engine RPM (kW) | 250 (186) |
| Type — standard | AGCO POWER™ 8.4L |
| Number of cylinder | 6 |
| Displacement liters (CID) | 8.4 (514) |
| Aspiration | Twin Turbo Chargers with eWastegate |
| Alternator / battery (standard) | 240 amps / 12 V (twin 120 amp alternators) |
| TRANSMISSION SYSTEM | |
| Type | Dyna-VT™ with Power Management (PM) 31 mph (50 kph) |
| Field speed range | 0.02 – 17 mph Forward and 0.02 – 10 mph Reverse (0.03 – 28 km/h Forward and 0.03 – 16 km/h Reverse) |
| Road speed range | 0.02 – 31 mph Forward and 0.02 – 24 mph Reverse (0.03 – 50 km/h Forward and 0.03 – 38 km/h Reverse) |
| Road speed range — 40 kph — optional | Optional – 0.02 – 30 mph Forward and 0.02 – 24 mph Reverse (0.03 – 40 km/h Forward and 0.03 – 38 km/h Reverse) |
| Speeds forward | Infinite |
| Cruise control speeds | 4 |
| REAR AXLE | |
| 4.33 x 118 in. (110 x 2,999 mm) long axle | Standard |
| 4.33 x 105 in (110 x 2,550 mm) short axle | Optional |
| Differential lock — full-locking, electrohydraulic | Standard |
| FRONT AXLE | |
| 4-wheel drive differential lock | Standard – full-locking, electrohydraulic |
| 4-wheel drive maximum steering angle | 55º |
| 3 POINT HITCH REAR | |
| Category 3/4N Quick Hitch | Standard |
| Maximum lift capacity — At Link Ends lbs. (kg) | 20,345 (9,228) |
| 3-POINT HITCH – FRONT (OPT.) | |
| Category 3 | Standard |
| Maximum lift capacity — At Link Ends lbs. (kg) | 10,970 (4,976) |
| DRAWBAR | |
| Category 3 with drop pin | Standard |
| Category 3 heavy duty with drop pin | Optional |
| Category 4 with drop pin | Optional |
| PTO | |
| Speeds RPM — standard | 1,000 / 1,000E |
| Shaft diameter in. (mm) | 1.75 in. (45 mm) shaft, 20 spline |
| HYDRAULICS | |
| System type | Closed Center Load Sensing (CCLS) |
| Total flow rate US gallon (L) | 54 (205) |
| Maximum pressure PSI (bar) | 2,900 (200) |
| Remote Valves — Standard/Optional | Standard: 4 fingertip controlled valves Optional: 2 additional fingertip controls for a total of 6 auxiliary valves |
| OPERATOR AREA | |
| Cab glass area ft2 (m2) | 67.3 (6.22) |
| Noise level dB(A) | 71 |
| OptiRide Plus hydraulic suspended cab | Standard |
| Operator seat — air suspension | Standard |
| Control Center Display (CCD) | Standard |
| TECHNOLOGY | |
| Auto-Guide 3000 | Standard |
| AgCommand | AgCommand ready standard, subscription optional |
| DIMENSION& WEIGHT* | |
| Wheelbase in. (mm) | 122 (3,100) |
| Overall length-front wt. frame to rear link arms in. (mm) | 218.6 (5,552) |
| Maximum height over cab in. (mm) | 141 (3,584) |
| Approx. shipping weight lbs. (kg) | 23,810 (10,800) |
| Maximum allowable weight lbs. (kg) | 33,070 (15,000) |
| Fuel CAPACITY | |
| Fuel tank capacity US gallon (L) | 166 (630) |
| DEF (AdBlue) usable tank capacity US gallon (L) | 15.8 (60) |
Massey Ferguson 8735 Tractor
Massey Ferguson 8735 Tractor Key Features
- Engine Model: AGCO POWER™ 8.4L
- Transmission: Dyna-VT™ with Power Management (PM) 31 mph (50 kph)
- Hydraulic System: Closed center load sensing (CCLS)
- Maximum Horsepower: 350HP
- PTO HP: 275HP
- Rear Lift Capacity @ link ends: 26,455lbs
- Fuel Tank Capacity: 630Ltr.
Massey Ferguson 8735 Tractor Price
The Massey Ferguson 8735 Tractor Price is $270,000.
Massey Ferguson 8735 Tractor Specs
| ENGINE PERFORMANCE | |
| Maximum ISO engine HP @ 2,000 engine RPM (kW) | 350 (261) |
| ISO engine HP @ 2,100 rated engine RPM (kW) | 320 (239) |
| PTO HP @ 2,100 rated engine RPM (kW) | 275 (205) |
| Type — standard | AGCO POWER™ 8.4L |
| Number of cylinder | 6 |
| Displacement liters (CID) | 8.4 (514) |
| Aspiration | Twin Turbo Chargers with eWastegate |
| Alternator / battery (standard) | 240 amps / 12 V (twin 120 amp alternators) |
| TRANSMISSION SYSTEM | |
| Type | Dyna-VT™ with Power Management (PM) 31 mph (50 kph) |
| Field speed range | 0.02 – 17 mph Forward and 0.02 – 10 mph Reverse (0.03 – 28 km/h Forward and 0.03 – 16 km/h Reverse) |
| Road speed range | 0.02 – 31 mph Forward and 0.02 – 24 mph Reverse (0.03 – 50 km/h Forward and 0.03 – 38 km/h Reverse) |
| Road speed range — 40 kph — optional | Optional – 0.02 – 30 mph Forward and 0.02 – 24 mph Reverse (0.03 – 40 km/h Forward and 0.03 – 38 km/h Reverse) |
| Speeds forward | Infinite |
| Cruise control speeds | 4 |
| REAR AXLE | |
| 4.33 x 118 in. (110 x 2,999 mm) long axle | Standard |
| 4.33 x 105 in (110 x 2,550 mm) short axle | Optional |
| Differential lock — full-locking, electrohydraulic | Standard |
| FRONT AXLE | |
| 4-wheel drive differential lock | Standard – full-locking, electrohydraulic |
| 4-wheel drive maximum steering angle | 55º |
| 3 POINT HITCH REAR | |
| Category 3/4N Quick Hitch | Standard |
| Maximum lift capacity — At Link Ends lbs. (kg) | 20,345 (9,228) |
| 3-POINT HITCH – FRONT (OPT.) | |
| Category 3 | Standard |
| Maximum lift capacity — At Link Ends lbs. (kg) | 10,970 (4,976) |
| DRAWBAR | |
| Category 3 with drop pin | Standard |
| Category 3 heavy duty with drop pin | Optional |
| Category 4 with drop pin | Optional |
| PTO | |
| Speeds RPM — standard | 1,000 / 1,000E |
| Shaft diameter in. (mm) | 1.75 in. (45 mm) shaft, 20 spline |
| HYDRAULICS | |
| System type | Closed Center Load Sensing (CCLS) |
| Total flow rate US gallon (L) | 54 (205) |
| Maximum pressure PSI (bar) | 2,900 (200) |
| Remote Valves — Standard/Optional | Standard: 4 fingertip controlled valves Optional: 2 additional fingertip controls for a total of 6 auxiliary valves |
| OPERATOR AREA | |
| Cab glass area ft2 (m2) | 67.3 (6.22) |
| Noise level dB(A) | 71 |
| OptiRide Plus hydraulic suspended cab | Standard |
| Operator seat — air suspension | Standard |
| Control Center Display (CCD) | Standard |
| TECHNOLOGY | |
| Auto-Guide 3000 | Standard |
| AgCommand | AgCommand ready standard, subscription optional |
| DIMENSION& WEIGHT* | |
| Wheelbase in. (mm) | 122 (3,100) |
| Overall length-front wt. frame to rear link arms in. (mm) | 218.6 (5,552) |
| Maximum height over cab in. (mm) | 141 (3,584) |
| Approx. shipping weight lbs. (kg) | 23,810 (10,800) |
| Maximum allowable weight lbs. (kg) | 33,070 (15,000) |
| Fuel CAPACITY | |
| Fuel tank capacity US gallon (L) | 166 (630) |
| DEF (AdBlue) usable tank capacity US gallon (L) | 15.8 (60) |
Massey Ferguson 8737 Tractor
Massey Ferguson 8737 Tractor Key Features
- Engine Model: AGCO POWER™ 8.4L
- Transmission: Dyna-VT™ with Power Management (PM) 31 mph (50 kph)
- Hydraulic System: Closed center load sensing (CCLS)
- Maximum Horsepower: 370HP
- PTO HP: 290HP
- Rear Lift Capacity @ link ends: 26,455lbs
- Fuel Tank Capacity: 630Ltr.
Massey Ferguson 8737 Tractor Price
The Massey Ferguson 8737 Tractor Price is $296,796.
Massey Ferguson 8737 Tractor Specs
| ENGINE PERFORMANCE | |
| Maximum ISO engine HP @ 2,000 engine RPM (kW) | 370 (276) |
| ISO engine HP @ 2,100 rated engine RPM (kW) | 340 (254) |
| PTO HP @ 2,100 rated engine RPM (kW) | 290 (216) |
| Type — standard | AGCO POWER™ 8.4L |
| Number of cylinder | 6 |
| Displacement liters (CID) | 8.4 (514) |
| Aspiration | Twin Turbo Chargers with eWastegate |
| Alternator / battery (standard) | 240 amps / 12 V (twin 120 amp alternators) |
| TRANSMISSION SYSTEM | |
| Type | Dyna-VT™ with Power Management (PM) 31 mph (50 kph) |
| Field speed range | 0.02 – 17 mph Forward and 0.02 – 10 mph Reverse (0.03 – 28 km/h Forward and 0.03 – 16 km/h Reverse) |
| Road speed range | 0.02 – 31 mph Forward and 0.02 – 24 mph Reverse (0.03 – 50 km/h Forward and 0.03 – 38 km/h Reverse) |
| Road speed range — 40 kph — optional | Optional – 0.02 – 30 mph Forward and 0.02 – 24 mph Reverse (0.03 – 40 km/h Forward and 0.03 – 38 km/h Reverse) |
| Speeds forward | Infinite |
| Cruise control speeds | 4 |
| REAR AXLE | |
| 4.33 x 118 in. (110 x 2,999 mm) long axle | Standard |
| 4.33 x 105 in (110 x 2,550 mm) short axle | Optional |
| Differential lock — full-locking, electrohydraulic | Standard |
| FRONT AXLE | |
| 4-wheel drive differential lock | Standard – full-locking, electrohydraulic |
| 4-wheel drive maximum steering angle | 55º |
| 3 POINT HITCH REAR | |
| Category 3/4N Quick Hitch | Standard |
| Maximum lift capacity — At Link Ends lbs. (kg) | 20,345 (9,228) |
| 3-POINT HITCH – FRONT (OPT.) | |
| Category 3 | Standard |
| Maximum lift capacity — At Link Ends lbs. (kg) | 10,970 (4,976) |
| DRAWBAR | |
| Category 3 with drop pin | Standard |
| Category 3 heavy duty with drop pin | Optional |
| Category 4 with drop pin | Optional |
| PTO | |
| Speeds RPM — standard | 1,000 / 1,000E |
| Shaft diameter in. (mm) | 1.75 in. (45 mm) shaft, 20 spline |
| HYDRAULICS | |
| System type | Closed Center Load Sensing (CCLS) |
| Total flow rate US gallon (L) | 54 (205) |
| Maximum pressure PSI (bar) | 2,900 (200) |
| Remote Valves — Standard/Optional | Standard: 4 fingertip controlled valves Optional: 2 additional fingertip controls for a total of 6 auxiliary valves |
| OPERATOR AREA | |
| Cab glass area ft2 (m2) | 67.3 (6.22) |
| Noise level dB(A) | 71 |
| OptiRide Plus hydraulic suspended cab | Standard |
| Operator seat — air suspension | Standard |
| Control Center Display (CCD) | Standard |
| TECHNOLOGY | |
| Auto-Guide 3000 | Standard |
| AgCommand | AgCommand ready standard, subscription optional |
| DIMENSION& WEIGHT* | |
| Wheelbase in. (mm) | 122 (3,100) |
| Overall length-front wt. frame to rear link arms in. (mm) | 218.6 (5,552) |
| Maximum height over cab in. (mm) | 141 (3,584) |
| Approx. shipping weight lbs. (kg) | 23,810 (10,800) |
| Maximum allowable weight lbs. (kg) | 33,070 (15,000) |
| Fuel CAPACITY | |
| Fuel tank capacity US gallon (L) | 166 (630) |
| DEF (AdBlue) usable tank capacity US gallon (L) | 15.8 (60) |
Final Conclusion
The MF 8700 Series is built with pride in Jackson, MN, in the newly developed plant that assembles all our high horsepower row crop tractors. It’s where our sprayers, track, and 4WD tractors have been made for farmers, by farmers, for many years.
I hope you like this article, but if you have any query regarding this article, then please comment below in the comment box, I will solve your problem solution as soon. thanks for reading my article and keep smile