John Deere 4430 Specs – The John Deere 4430 is a row-crop tractor manufactured by John Deere in Waterloo, Iowa, USA. The original price of the John Deere 4430 in 1977 was $23,000.
The John Deere 4430 tractor has several variants, including the 4430 Hi-Crop, which has high clearance.
John Deere 4430 was produced from 1973 to 1977 and has a 6.6L 6-cylinder diesel engine with a claimed PTO of 125 horsepower and a drawbar of 104.99 hp.
John Deere 4430 has a closed-center hydraulic system with a capacity of 11 gallons (41.6 L) for fuel and hydraulic systems.
The John Deere 4430 row-crop tractor has a rear lift capacity of 4550 lbs and an independent rear PTO with a speed of 540/1000 (1.375) RPM.
Scroll down to learn more about the Husqvarna YTH18542 Specs, price, Weight, Horsepower, Attachments, and other details.
John Deere 4430 Price Original
John Deere 4430 Original Price: $23,000 (1977 )
John Deere 4430 Specs
John Deere 4430 History
| Manufacturer: | John Deere |
| Type: | Row-Crop tractor |
| Factory: | Waterloo, Iowa, USA |
| Original price: | $23,000 (1977 ) |
John Deere 4430 Serial Numbers
| 1973: | 1000 |
| 1974: | 17500 |
| 1975: | 33050 |
| 1976: | 47222 |
| 1977: | 62960 |
John Deere 4430 Engine
| Engine | John Deere turbocharged diesel 6-cylinder liquid-cooled inline |
| Displacement: | 404 ci 6.6 L |
| Bore/Stroke: | 4.25×4.75 inches 108 x 121 mm |
| Fuel system: | direct injection |
| Air cleaner: | dry with secondary element |
| Pre-heating: | ether injection |
| Compression: | 15.5:1 |
| Rated RPM: | 2200 |
| Idle RPM: | 800-2200 |
| Operating RPM: | 1500-2200 |
| Firing order: | 1-5-3-6-2-4 |
| Starter: | Delco-Remy electric |
| Starter volts: | 12 |
| Coolant capacity: | 30 qts 28.4 L |
| 32 qts 30.3 L (with heater) |
|
| Intake valve clearance: | 0.018 inches 0.457 mm |
| Exhaust valve clearance: | 0.028 inches 0.711 mm |
John Deere 4430 Power
| Drawbar (claimed): | 108.46 hp 80.9 kW |
| PTO (claimed): | 125.88 hp 93.9 kW |
| Drawbar (tested): | 104.99 hp 78.3 kW |
| PTO (tested): | 125.88 hp 93.9 kW |
John Deere 4430 Mechanical
| Chassis: | 4×2 2WD |
| 4×4 HFWD 4WD | |
| Steering: | power |
| Brakes: | hydraulic wet disc |
| Cab: | Optional Roll-Gard ROPS. Optional Sound Gard body and cab. |
| Transmissions: | 8-speed partially synchronized |
| 16-speed partial power shift | |
| 8-speed full power shift |
John Deere 4430 Transmission
| Transmission: | John Deere Syncro-Range |
| Type: | partially synchronized |
| Gears: | 8 forward and 2 reverse |
| Clutch: | Perma-Clutch hydraulic wet disc |
| Oil capacity: | 44 qts 41.6 L |
John Deere 4430 Hydraulics
| Type: | closed center |
| Capacity: | 11 gal 41.6 L |
| 10 gal 37.9 L (Power Shift) |
|
| Pressure: | 2250 psi 155.1 bar |
| Valves: | 1 to 3 |
| Pump flow: | 22 gpm 83.3 lpm |
John Deere 4430 Dimensions
| Wheelbase: | 106.6 inches 270 cm |
| Length: | 160.75 inches 408 cm |
| Width: | 89.625 inches 227 cm (axle) |
| 70.8 inches 179 cm (fenders) |
|
| 82 inches 208 cm (cab fenders) |
|
| Rear tread: | 60 to 90 inches 152 to 228 cm |
John Deere 4430 Weight
| ROPS Shipping: | 9732 lbs 4414 kg |
| Cab Shipping: | 10762 lbs 4881 kg |
| Operating: | 11350 lbs 5148 kg |
| Ballasted: | 15060 lbs 6831 kg |
John Deere 4430 Height
| Steering wheel: | 85.25 inches 216 cm |
| Cab: | 114 inches 289 cm |
| ROPS Exhaust: | 109.3 inches 277 cm |
| Cab Exhaust: | 125.25 inches 318 cm |
John Deere 4430 PTO
| Rear PTO: | independent |
| Rear RPM: | 540/1000 |
| 1000 | |
| Engine RPM: | 540@2200 1000@2200 |
John Deere 4430 Tires
| Ag front: | 10.00-16 |
| Ag rear: | 18.4-38 |
| Ag front: | 7.50-15 |
| Ag rear: | 20.8-34 |
John Deere 4430 Electrical
| Ground: | negative |
| Charging system: | alternator |
| ROPS Charging amps: | 37 |
| Cab Charging amps: | 55 |
| Batteries: | 2 |
| Battery CCA: | 800 |
| Battery volts: | 6 |
| Battery Group: | 5D |
Also Check:
- John Deere 3010
- John Deere 4010
- John Deere LX176
- John Deere 160
- John Deere 265
- John Deere L111
- John Deere L130
John Deere 4430 Attachments
John Deere 148 Loader |
|
| Loader weight: | 1350 lbs 612 kg |
| Height (to pin): | 126 inches 320 cm |
| Clearance, dumped bucket: | 102 inches 259 cm |
| Dump reach: | 32 inches 81 cm |
| Dump angle: | 38° |
| Clearance, level bucket: | 121 inches 307 cm |
| Rollback angle: | 11° |
| Breakout force (lift): | 4700 lbs 2131 kg |
| Lift to full height (at pin): | 3100 lbs 1406 kg |
| Bucket capacity: | 0.5 cu yd 0.4 cu m |
| 0.6 cu yd 0.5 cu m |
|
| 0.8 cu yd 0.6 cu m |
|
| 0.9 cu yd 0.7 cu m |
|
| Bucket width: | 60 inches 152 cm |
| 72 inches 182 cm |
|
| 84 inches 213 cm |
|
| 96 inches 243 cm |
|
John Deere 158 Loader |
|
| Loader weight: | 1771 lbs 803 kg |
| Height (to pin): | 156 inches 396 cm |
| Clearance, dumped bucket: | 132 inches 335 cm |
| Dump reach: | 32 inches 81 cm |
| Dump angle: | 37° |
| Clearance, level bucket: | 151 inches 383 cm |
| Rollback angle: | 12° |
| Breakout force (lift): | 5000 lbs 2268 kg |
| Lift to full height (at pin): | 3800 lbs 1723 kg |
| Bucket capacity: | 0.5 cu yd 0.4 cu m |
| 0.6 cu yd 0.5 cu m |
|
| 0.8 cu yd 0.6 cu m |
|
| 0.9 cu yd 0.7 cu m |
|
| Bucket width: | 60 inches 152 cm |
| 72 inches 182 cm |
|
| 84 inches 213 cm |
|
| 96 inches 243 cm |
|
Also Check:
That was all about the John Deere 4430 Price, Specs and images. I hope you like this post, and it’s helped you a lot, but if you are facing any issue related to this John Deere 4430 Tractor then feel free to leave a comment I like helping everyone. Thanks!