John Deere 2850 Review, Price, Specs, Features & Images 2024

John Deere 2850 HP, Price, Specification, Review, Interior, Top Speed, Features, Overview

John-Deere-2850-Overview

John Deere 2850 was introduced in 1986. Production of 2850 standard tractor was started in 1987 and discontinued in 1994.  John Deere is always known for its conveniences and high-quality structure design. 2850 was one the most successful tractor of its time. The total production of 2850 was about Rs. 7,50,000.

John Deere Used 2850 Price

John Deere 2850

The average price of John Deere 2850 used is 14731 EUR.

John Deere 2850 Tractor Key Features

Engine

John Deere 2850 engine specs

John Deere 2850 is powered by an 86-horsepower, turbocharged four-cylinder, diesel engine that has a displacement of 3.9 liters.

The maximum torque of 2850 is 315 Nm and is achieved at 1500 rev/min. In John Deere 2850 optionally is the synchronous transmission with 8 forward and 4 reverse speeds or a power synchro transmission with 16 forward and 8 reverse gears available.

 You can also choose between rear or all-wheel drive. The top speed of 2850 is 40 km/h.

Cab

Already at the 2850 John Deere put all in a comfortable cab. For this reason, the SG2 cabin has been replaced by a better CC2 cabin in the 1990 levels.

 This booth contains air-condition with a comfortable seat and other options.

John Deere 2850 Cab

Whether with or without a cabin, buying a used John Deere 2850 is the perfect investment for small and medium-sized. 

The 2850 tractor proves reliability and a high range of service. All over John Deere 2850 was one of the best tractors of its time and most powerful and also efficient.

John Deere 2850 Specs

SPECIFICATION
Brand John Deere
Model 2850
Drive 2WD/4WD
Production 1986–1994
ENGINE
Type John Deere 4239TL, Turbocharged
Fuel Diesel
No. of Cylinders 4
Engine 239 ci (3.9L)
Bore/Stroke 4.19×4.33 inches [106 x 110 mm]
Power 86 hp [64.1 kW]
Air cleaner Dry
Rated RPM 2300
Torque 232.3 lb-ft [315.0 Nm]
Torque RPM 1500
TRANSMISSION
Type Two-speed power shift
Gears 16 forward and 8 reverse
Max. Speed 40 kmph
3-POINT HITCH
Rear Type Category II
Control Position and draft control
2WD Rear lift (at ends) 8003 lbs [3630 kg]
4WD Rear lift (at ends) 8818 lbs [3999 kg]
Front Hitch Category-II
Front lift (at ends) 3594 lbs [1630 kg]
POWER TAKE-OFF (PTO)
Rear PTO Independent
Clutch Hydraulic wet disc
Rear RPM 540/1000
Engine RPM 540@2070 1000@2172
Front PTO Independent
Clutch Hydraulic wet disc
Front RPM 1000
Engine RPM 1000@2172
HYDRAULICS
Type Closed-center constant pressure
Pressure 2756 psi [190.0 bar]
Total flow 11.6 GPM [43.9 lpm]
CAPACITY
Fuel 22.2 gal [84.0 L], 35.9 gal [135.9 L]
DIMENSIONS AND TIRES
2WD Wheelbase 89.2 inches [226 cm]
4WD Wheelbase 90 inches [228 cm]
Weight 7694 to 8653 pounds
Front tire 10.00-16
2WD Rear tire 14.9R38
Length 167.1 inches [424 cm]
Width 81.4 inches [206 cm]
Height (cab) 81.4 inches [206 cm]
4WD Clearance (front axle) 20.5 inches [52 cm]
2WD Clearance (front axle) 26.5 inches [67 cm]
2WD turn radius 25 feet [7.6 m]
4WD turn radius 27.6 feet [8.4 m]
2WD Standard tires (ag) Front: 10.00-16. Rear: 14.9R38
4WD Standard tires (ag) Front: 12.4R28. Rear: 14.9R38
CHASSIS, STEERING, CAB, AND BRAKES
Chassis 4×2 2WD, 4×4 MFWD 4WD
Final drives Planetary
Steering Power
Brakes Hydraulic wet disc
Cab ROPS. Sound-Gard and CC2 cab optional
ELECTRICAL
Battery 12 V
Number 2
Ground Negative
Charging 55 amp
Amp-hours 55

I hope this article will help you to buy or sell this 2850 muscular tractor.

Also Read: 

Leave a Comment