Challenger MT 800C | MT 900C Series Articulated 4-WD Tractors Specs, Price, Overview
The Challenger is raising the bar even higher with the debut of the Challenger MT800C Series (MT835C, MT845, MT855C, MT865C, MT875C) track tractors and MT900C 4WD articulated (MT945C, MT955C, MT965C, MT975C) tractors.
Both lines are designed with new features and improvements designed to make you even more productive and efficient.
Let’s Check out Challenger MT 800C and MT 900C Series Articulated 4-WD Tractors Horsepower and PTO power:
| Model | Engine hp | PTO hp |
| Challenger MT835C | 410 (306 kW) | 335 (249 kW) |
| Challenger MT845C/MT945C | 440 (328 kW) | 360 (268 kW) |
| Challenger MT855C/MT955C | 475 (354 kW) | 385 (287 kW) |
| Challenger MT865C/MT965C | 525 (391 kW) | 425 (316 kW) |
| Challenger MT875C/MT975C | 585 (436 kW) | 425 (316 kW) |
Here in this article, I am going to share with you Challenger MT 800C / MT 900C Series Articulated 4-Wheel Drive Tractors Price List in the USA, Specifications, Key Features, and Images information, I assure that all kinds of information are genuine and reliable, I hope it will useful to you my friends.
Challenger MT945C Tractor
Challenger MT945C Tractor Price
- $203,800 USD
Challenger MT945C Tractor Key facts
- Engine: Cat® C15 ACERT™ Tier III
- Engine Power: 440 HP
- PTO Power: 360 HP
- Transmission: Cat® Powershift 16F / 4R
- Hydraulics System: Load Independent Flow Division (Closed-Center, Pressure-Flow Compensated)
- Lift Capacity: 8845 kg
- Fuel tank capacity: 1476 L
Challenger MT945C Tractor Specifications
| ENGINE | |
| Engine Type | Cat® C15 ACERT™ Tier III |
| Rated Engine Power – hp (kW) | 440 (328) |
| PTO Power @ rated 2100 rpm – hp (kW | 360 (268) |
| Engine Power Growth @ 1800 rpm | 8% |
| Peak Engine Power – hp (kW) | 475 (354) |
| Engine Torque Rise @ rpm | 42%@1400 |
| # Cylinders / # Valves | 6 / 24 |
| Displacement – cubic in. (L) | 928 (15.2 L) |
| Aspiration | Turbocharged / Air-to-Air Aftercooled |
| FUEL SYSTEM | |
| Fuel System | MEUI – ADEM™ 4 Full Electronic Control |
| Fuel Tank Capacity – US gal. (L) | 390 (1,476) |
| TRANSMISSION | |
| Type | Cat® Powershift 16F / 4R |
| Maximum Speed – mph (kph) | 24.6 (39.6) |
| PTO | |
| Independent PTO | 1000 rpm 20-spline 1.75” (45 mm) |
| (Optional) | Electronic Control |
| ELECTRICAL SYSTEM | |
| Alternator | 185 amp |
| Batteries | (4) 1,000 cca 12 V |
| HYDRAULIC SYSTEM | |
| Type of System | Load Independent Flow Division (Closed-Center, Pressure-Flow Compensated) |
| Standard Pump Flow – gpm (lpm) | 43.5 (164.7) |
| Optional Pump Flow – gpm (lpm) | 59 (224.2) |
| Hydraulic Remotes | 4 Standard / up to 6 Optional |
| Max Flow at 1 Remote – gpm (lpm) | 36 (136.3) |
| Maximum System Pressure – psi (bar | 2,900 (200) |
| STEERING | |
| Steering | Hydraulic Articulation |
| Optional System | Electro-hydraulic Enhancement |
| Turning Angle | 42° |
| Oscillation Angle | 13° |
| Centerline Turning Radius – ft. (m) | 16 (4.9) |
| AXLES & FINAL DRIVE | |
| Manufacturer | GIMA |
| Drive Line Torque Rating: ft.-lbs. (N*m) | 9C: 13,720 (18,600) |
| Final Drive | Double Inboard Planetary |
| Bar Diameter – in. (mm) | 5.7 (145) |
| Standard Tires | 710 / 70R42 Duals |
| Service Brakes (Front & Rear Axle) | Wet Disk Spring Released |
| DRAWBAR | |
| Std. Wide Swing Drawbar | Swinging +/- 9° |
| Drawbar Load Rating – lbs. (kg) | 10,000 (4,536) |
| Category | Cat 4 (Std.) |
| 3-POINT HITCH | |
| Lift Capacity – lbs. (kg) | 19,500 (8,845) |
| Category | Category 3/4N |
| DIMENSIONS | |
| Wheelbase – in. (mm) | 156 (3,950) |
| Overall Width w/ Standard Tires – in. (mm) | 190 (4,828) |
| Overall Length – in. (mm) | 298 (7,569.2) |
| Overall Height to Top of Cab – in. (mm) | 150 (3,800) |
| Approx. Shipping Weight – lbs. (kg)* | 39,266 (17,810) |
| Base Operating Weight – lbs. (kg) | 47,500 (21,546) |
| Maximum Operating Weight – lbs. (kg) | 50,000 (22,680) |
Challenger MT955C Tractor
Challenger MT955C Tractor Price
- $289,000 USD
Challenger MT955C Tractor Key facts
- Engine: Cat® C15 ACERT™ Tier III
- Engine Power: 475 HP
- PTO Power: 385 HP
- Transmission: Cat® Powershift 16F / 4R
- Hydraulics System: Load Independent Flow Division (Closed-Center, Pressure-Flow Compensated)
- Lift Capacity: 8845 kg
- Fuel tank capacity: 1476 L
Challenger MT955C Tractor Specifications
| ENGINE | |
| Engine Type | Cat® C15 ACERT™ Tier III |
| Rated Engine Power – hp (kW) | 475 (354) |
| PTO Power @ rated 2100 rpm – hp (kW | 385 (287) |
| Engine Power Growth @ 1800 rpm | 8% |
| Peak Engine Power – hp (kW) | 513 (382) |
| Engine Torque Rise @ rpm | 42%@1400 |
| # Cylinders / # Valves | 6 / 24 |
| Displacement – cubic in. (L) | 928 (15.2 L) |
| Aspiration | Turbocharged / Air-to-Air Aftercooled |
| FUEL SYSTEM | |
| Fuel System | MEUI – ADEM™ 4 Full Electronic Control |
| Fuel Tank Capacity – US gal. (L) | 390 (1,476) |
| TRANSMISSION | |
| Type | Cat® Powershift 16F / 4R |
| Maximum Speed – mph (kph) | 24.6 (39.6) |
| PTO | |
| Independent PTO | 1000 rpm 20-spline 1.75” (45 mm) |
| (Optional) | Electronic Control |
| ELECTRICAL SYSTEM | |
| Alternator | 185 amp |
| Batteries | (4) 1,000 cca 12 V |
| HYDRAULIC SYSTEM | |
| Type of System | Load Independent Flow Division (Closed-Center, Pressure-Flow Compensated) |
| Standard Pump Flow – gpm (lpm) | 43.5 (164.7) |
| Optional Pump Flow – gpm (lpm) | 59 (224.2) |
| Hydraulic Remotes | 4 Standard / up to 6 Optional |
| Max Flow at 1 Remote – gpm (lpm) | 36 (136.3) |
| Maximum System Pressure – psi (bar | 2,900 (200) |
| STEERING | |
| Steering | Hydraulic Articulation |
| Optional System | Electro-hydraulic Enhancement |
| Turning Angle | 42° |
| Oscillation Angle | 13° |
| Centerline Turning Radius – ft. (m) | 16 (4.9) |
| AXLES & FINAL DRIVE | |
| Manufacturer | GIMA |
| Drive Line Torque Rating: ft.-lbs. (N*m) | 9C: 13,720 (18,600) |
| Final Drive | Double Inboard Planetary |
| Bar Diameter – in. (mm) | 5.7 (145) |
| Standard Tires | 710 / 70R42 Duals |
| Service Brakes (Front & Rear Axle) | Wet Disk Spring Released |
| DRAWBAR | |
| Std. Wide Swing Drawbar | Swinging +/- 9° |
| Drawbar Load Rating – lbs. (kg) | 10,000 (4,536) |
| Category | Cat 4 (Std.) |
| 3-POINT HITCH | |
| Lift Capacity – lbs. (kg) | 19,500 (8,845) |
| Category | Category 3/4N |
| DIMENSIONS | |
| Wheelbase – in. (mm) | 156 (3,950) |
| Overall Width w/ Standard Tires – in. (mm) | 190 (4,828) |
| Overall Length – in. (mm) | 298 (7,569.2) |
| Overall Height to Top of Cab – in. (mm) | 150 (3,800) |
| Approx. Shipping Weight – lbs. (kg)* | 39,266 (17,810) |
| Base Operating Weight – lbs. (kg) | 47,500 (21,546) |
| Maximum Operating Weight – lbs. (kg) | 54,000 (24,494) |
Challenger MT965C Tractor
Challenger MT965C Tractor Price
- $270,550 USD
Challenger MT965C Tractor Key facts
- Engine: Cat® C15 ACERT™ Tier III
- Engine Power: 525 HP
- PTO Power: 425 HP
- Transmission: Cat® Powershift 16F / 4R
- Hydraulics System: Load Independent Flow Division (Closed-Center, Pressure-Flow Compensated)
- Lift Capacity: 8845 kg
- Fuel tank capacity: 1476 L
Challenger MT965C Tractor Specifications
| ENGINE | |
| Engine Type | Cat® C15 ACERT™ Tier III |
| Rated Engine Power – hp (kW) | 525 (391) |
| PTO Power @ rated 2100 rpm – hp (kW | 425 (316) |
| Engine Power Growth @ 1800 rpm | 8% |
| Peak Engine Power – hp (kW) | 567 (422) |
| Engine Torque Rise @ rpm | 42%@1400 |
| # Cylinders / # Valves | 6 / 24 |
| Displacement – cubic in. (L) | 1,105 (18.1 L) |
| Aspiration | Turbocharged / Air-to-Air Aftercooled |
| FUEL SYSTEM | |
| Fuel System | MEUI – ADEM™ 4 Full Electronic Control |
| Fuel Tank Capacity – US gal. (L) | 390 (1,476) |
| TRANSMISSION | |
| Type | Cat® Powershift 16F / 4R |
| Maximum Speed – mph (kph) | 24.6 (39.6) |
| PTO | |
| Independent PTO | 1000 rpm 20-spline 1.75” (45 mm) |
| (Optional) | Electronic Control |
| ELECTRICAL SYSTEM | |
| Alternator | 185 amp |
| Batteries | (4) 1,000 cca 12 V |
| HYDRAULIC SYSTEM | |
| Type of System | Load Independent Flow Division (Closed-Center, Pressure-Flow Compensated) |
| Standard Pump Flow – gpm (lpm) | 43.5 (164.7) |
| Optional Pump Flow – gpm (lpm) | 59 (224.2) |
| Hydraulic Remotes | 4 Standard / up to 6 Optional |
| Max Flow at 1 Remote – gpm (lpm) | 36 (136.3) |
| Maximum System Pressure – psi (bar | 2,900 (200) |
| STEERING | |
| Steering | Hydraulic Articulation |
| Optional System | Electro-hydraulic Enhancement |
| Turning Angle | 42° |
| Oscillation Angle | 13° |
| Centerline Turning Radius – ft. (m) | 16 (4.9) |
| AXLES & FINAL DRIVE | |
| Manufacturer | GIMA |
| Drive Line Torque Rating: ft.-lbs. (N*m) | 9C: 13,720 (18,600) |
| Final Drive | Double Inboard Planetary |
| Bar Diameter – in. (mm) | 5.7 (145) |
| Standard Tires | 710 / 70R42 Duals |
| Service Brakes (Front & Rear Axle) | Wet Disk Spring Released |
| DRAWBAR | |
| Std. Wide Swing Drawbar | Swinging +/- 9° |
| Drawbar Load Rating – lbs. (kg) | 10,000 (4,536) |
| Category | Cat 4 (Std.) |
| 3-POINT HITCH | |
| Lift Capacity – lbs. (kg) | 19,500 (8,845) |
| Category | Category 3/4N |
| DIMENSIONS | |
| Wheelbase – in. (mm) | 156 (3,950) |
| Overall Width w/ Standard Tires – in. (mm) | 190 (4,828) |
| Overall Length – in. (mm) | 298 (7,569.2) |
| Overall Height to Top of Cab – in. (mm) | 150 (3,800) |
| Approx. Shipping Weight – lbs. (kg)* | 39,767 (18,038) |
| Base Operating Weight – lbs. (kg) | 47,500 (21,546) |
| Maximum Operating Weight – lbs. (kg) | 60,000 (27,215) |
Challenger MT975C Tractor
Challenger MT975C Tractor Price
- $260,000 USD
Challenger MT975C Tractor Key facts
- Engine: Cat® C15 ACERT™ Tier III
- Engine Power: 585 HP
- PTO Power: 425 HP
- Transmission: Cat® Powershift 16F / 4R
- Hydraulics System: Load Independent Flow Division (Closed-Center, Pressure-Flow Compensated)
- Lift Capacity:NA
- Fuel tank capacity: 1476 L
Challenger MT975C Tractor Specifications
| ENGINE | |
| Engine Type | Cat® C15 ACERT™ Tier III |
| Rated Engine Power – hp (kW) | 585 (436) |
| PTO Power @ rated 2100 rpm – hp (kW | 425 (316) |
| Engine Power Growth @ 1800 rpm | 8% |
| Peak Engine Power – hp (kW) | 631 (470) |
| Engine Torque Rise @ rpm | 42%@1400 |
| # Cylinders / # Valves | 6 / 24 |
| Displacement – cubic in. (L) | 1,105 (18.1 L) |
| Aspiration | Turbocharged / Air-to-Air Aftercooled |
| FUEL SYSTEM | |
| Fuel System | MEUI – ADEM™ 4 Full Electronic Control |
| Fuel Tank Capacity – US gal. (L) | 390 (1,476) |
| TRANSMISSION | |
| Type | Cat® Powershift 16F / 4R |
| Maximum Speed – mph (kph) | 24.6 (39.6) |
| PTO | |
| Independent PTO | 1000 rpm 20-spline 1.75” (45 mm) |
| (Optional) | Electronic Control |
| ELECTRICAL SYSTEM | |
| Alternator | 185 amp |
| Batteries | (4) 1,000 cca 12 V |
| HYDRAULIC SYSTEM | |
| Type of System | Load Independent Flow Division (Closed-Center, Pressure-Flow Compensated) |
| Standard Pump Flow – gpm (lpm) | 43.5 (164.7) |
| Optional Pump Flow – gpm (lpm) | 59 (224.2) |
| Hydraulic Remotes | 4 Standard / up to 6 Optional |
| Max Flow at 1 Remote – gpm (lpm) | 36 (136.3) |
| Maximum System Pressure – psi (bar | 2,900 (200) |
| STEERING | |
| Steering | Hydraulic Articulation |
| Optional System | Electro-hydraulic Enhancement |
| Turning Angle | 42° |
| Oscillation Angle | 13° |
| Centerline Turning Radius – ft. (m) | 16 (4.9) |
| AXLES & FINAL DRIVE | |
| Manufacturer | GIMA |
| Drive Line Torque Rating: ft.-lbs. (N*m) | 9C: 13,720 (18,600) |
| Final Drive | Double Inboard Planetary |
| Bar Diameter – in. (mm) | 5.7 (145) |
| Standard Tires | 710 / 70R42 Duals |
| Service Brakes (Front & Rear Axle) | Wet Disk Spring Released |
| DRAWBAR | |
| Std. Wide Swing Drawbar | Swinging +/- 9° |
| Drawbar Load Rating – lbs. (kg) | 10,000 (4,536) |
| Category | Cat 4 (Std.) |
| 3-POINT HITCH | |
| Lift Capacity – lbs. (kg) | N/A |
| Category | N/A |
| DIMENSIONS | |
| Wheelbase – in. (mm) | 156 (3,950) |
| Overall Width w/ Standard Tires – in. (mm) | 190 (4,828) |
| Overall Length – in. (mm) | 298 (7,569.2) |
| Overall Height to Top of Cab – in. (mm) | 150 (3,800) |
| Approx. Shipping Weight – lbs. (kg)* | 39,767 (18,038) |
| Base Operating Weight – lbs. (kg) | 47,500 (21,546) |
| Maximum Operating Weight – lbs. (kg) | 60,000 (27,215) |
Challenger MT835C Track Tractor
Challenger MT835C Tractor Price
- $249,000 USD
Challenger MT835C Tractor Key facts
- Engine: Cat® C15 ACERT™ Tier III
- Engine Power: 410 HP
- PTO Power: 335 HP
- Transmission: Cat® Powershift 16F / 4R
- Hydraulics System: Load Independent Flow Division (Closed-Center, Pressure-Flow Compensated)
- Lift Capacity: 8845
- Fuel tank capacity: 1155 L
Challenger MT835C Tractor Specifications
| ENGINE | |
| Engine Type | Cat® C15 ACERT™ Tier III |
| Rated Engine Power – hp (kW) | 410 (306) |
| PTO Power @ rated 2100 rpm – hp (kW | 335 (249) |
| Engine Power Growth @ 1800 rpm | 8% |
| Peak Engine Power – hp (kW) | 442 (329) |
| Engine Torque Rise @ rpm | 42%@1400 |
| # Cylinders / # Valves | 6 / 24 |
| Displacement – cubic in. (L) | 928 (15.2 L) |
| Aspiration | Turbocharged / Air-to-Air Aftercooled |
| FUEL SYSTEM | |
| Fuel System | MEUI – ADEM™ 4 Full Electronic Control |
| Fuel Tank Capacity – US gal. (L) | 305 (1,155) |
| TRANSMISSION | |
| Type | Cat® Powershift 16F / 4R |
| Maximum Speed – mph (kph) | 24.6 (39.6) |
| Steering | Cat® Differential Steering |
| GAUGE OPTIONS | |
| GAUGE | Infinitely adjustable bar axle with smooth hardbar |
| Standard – in. (mm) | 90 – 128 (2,286 – 3,251) |
| BELT OPTIONS | |
| General Ag Belts – in. (mm) | 27.5, 30, 36 (698.5, 762, 914) |
| Extreme Application Belts – in. (mm) | 18, 30, 36 (457, 762, 914) |
| MOBIL-TRAC UNDERCARRIAGE | |
| Hardbar Suspension | Two Marsh Mellow® Springs |
| Undercarriage Suspension | Oscillating Bogie System w/ Suspended Midwheels |
| Hardbar Oscillation | Stabilizer Bar with 8° Range of Motion |
| PTO | |
| Independent PTO | 1000 RPM, 20 Spline, 1.75” (45 mm) |
| (Optional) | Electronically Controlled |
| ELECTRICAL SYSTEM | |
| Alternator | 185 amp |
| Batteries | (4) 1,000 cca 12 V |
| HYDRAULIC SYSTEM | |
| Type of System | Load Independent Flow Division (Closed-Center, Pressure-Flow Compensated) |
| Standard Pump Flow – gpm (lpm) | 43.5 (164.7) |
| Optional Pump Flow – gpm (lpm) | 59 (224.2) |
| Hydraulic Remotes | 4 Standard / up to 6 Optional |
| Max Flow at 1 Remote – gpm (lpm) | 36 (136.3) |
| Maximum System Pressure – psi (bar | 2,900 (200) |
| DRAWBAR | |
| Std. Wide Swing Drawbar | Roller Type +/- 32° Swing |
| Opt. Wide Swing Controlled Drawbar | Hydraulic Position Control / Dampening |
| Drawbar Load Rating – lbs. (kg) | 10,000 (4,536) |
| Category | Cat 4 (Std.) |
| 3-POINT HITCH | |
| Lift Capacity – lbs. (kg) | 19,500 (8,845) |
| Category | Category 3/4N |
| DIMENSIONS | |
| Wheelbase – in. (mm) | 118 (2,997) |
| Overall Width Wide Gauge – in. (mm) | 141.8 (3,601) |
| Overall Length – in. (mm) | 266 (6755) |
| Overall Height to Top of Cab – in. (mm) | 136 (3460) |
| Drawbar Clearance – in. (mm) | 14.4 (366) |
| Approx. Shipping Weight – lbs. (kg) | 41,000 (18,597) |
| Maximum Operating Weight – lbs. (kg) | 50,000 (22,680) |
Challenger MT845C Track Tractor
Challenger MT845C Tractor Price
- $235,000 USD
Challenger MT845C Tractor Key facts
- Engine: Cat® C15 ACERT™ Tier III
- Engine Power: 440 HP
- PTO Power: 360 HP
- Transmission: Cat® Powershift 16F / 4R
- Hydraulics System: Load Independent Flow Division (Closed-Center, Pressure-Flow Compensated)
- Lift Capacity: 8845
- Fuel tank capacity: 1155 L
Challenger MT845C Tractor Specifications
| ENGINE | |
| Engine Type | Cat® C15 ACERT™ Tier III |
| Rated Engine Power – hp (kW) | 440 (328) |
| PTO Power @ rated 2100 rpm – hp (kW | 360 (268) |
| Engine Power Growth @ 1800 rpm | 8% |
| Peak Engine Power – hp (kW) | 475 (354) |
| Engine Torque Rise @ rpm | 42%@1400 |
| # Cylinders / # Valves | 6 / 24 |
| Displacement – cubic in. (L) | 928 (15.2 L) |
| Aspiration | Turbocharged / Air-to-Air Aftercooled |
| FUEL SYSTEM | |
| Fuel System | MEUI – ADEM™ 4 Full Electronic Control |
| Fuel Tank Capacity – US gal. (L) | 305 (1,155) |
| TRANSMISSION | |
| Type | Cat® Powershift 16F / 4R |
| Maximum Speed – mph (kph) | 24.6 (39.6) |
| Steering | Cat® Differential Steering |
| GAUGE OPTIONS | |
| GAUGE | Infinitely adjustable bar axle with smooth hardbar |
| Standard – in. (mm) | 90 – 128 (2,286 – 3,251) |
| BELT OPTIONS | |
| General Ag Belts – in. (mm) | 27.5, 30, 36 (698.5, 762, 914) |
| Extreme Application Belts – in. (mm) | 18, 30, 36 (457, 762, 914) |
| MOBIL-TRAC UNDERCARRIAGE | |
| Hardbar Suspension | Two Marsh Mellow® Springs |
| Undercarriage Suspension | Oscillating Bogie System w/ Suspended Midwheels |
| Hardbar Oscillation | Stabilizer Bar with 8° Range of Motion |
| PTO | |
| Independent PTO | 1000 RPM, 20 Spline, 1.75” (45 mm) |
| (Optional) | Electronically Controlled |
| ELECTRICAL SYSTEM | |
| Alternator | 185 amp |
| Batteries | (4) 1,000 cca 12 V |
| HYDRAULIC SYSTEM | |
| Type of System | Load Independent Flow Division (Closed-Center, Pressure-Flow Compensated) |
| Standard Pump Flow – gpm (lpm) | 43.5 (164.7) |
| Optional Pump Flow – gpm (lpm) | 59 (224.2) |
| Hydraulic Remotes | 4 Standard / up to 6 Optional |
| Max Flow at 1 Remote – gpm (lpm) | 36 (136.3) |
| Maximum System Pressure – psi (bar | 2,900 (200) |
| DRAWBAR | |
| Std. Wide Swing Drawbar | Roller Type +/- 32° Swing |
| Opt. Wide Swing Controlled Drawbar | Hydraulic Position Control / Dampening |
| Drawbar Load Rating – lbs. (kg) | 10,000 (4,536) |
| Category | Cat 4 (Std.) |
| 3-POINT HITCH | |
| Lift Capacity – lbs. (kg) | 19,500 (8,845) |
| Category | Category 3/4N |
| DIMENSIONS | |
| Wheelbase – in. (mm) | 118 (2,997) |
| Overall Width Wide Gauge – in. (mm) | 141.8 (3,601) |
| Overall Length – in. (mm) | 266 (6755) |
| Overall Height to Top of Cab – in. (mm) | 136 (3460) |
| Drawbar Clearance – in. (mm) | 14.4 (366) |
| Approx. Shipping Weight – lbs. (kg) | 41,000 (18,597) |
| Maximum Operating Weight – lbs. (kg) | 50,000 (22,680) |
Challenger MT855C Track Tractor
Challenger MT855C Tractor Price
- $311,000 USD
Challenger MT855C Tractor Key facts
- Engine: Cat® C15 ACERT™ Tier III
- Engine Power: 475 HP
- PTO Power: 385 HP
- Transmission: Cat® Powershift 16F / 4R
- Hydraulics System: Load Independent Flow Division (Closed-Center, Pressure-Flow Compensated)
- Lift Capacity: 8845
- Fuel tank capacity: 1155 L
Challenger MT855C Tractor Specifications
| ENGINE | |
| Engine Type | Cat® C15 ACERT™ Tier III |
| Rated Engine Power – hp (kW) | 475 (354) |
| PTO Power @ rated 2100 rpm – hp (kW | 385 (287) |
| Engine Power Growth @ 1800 rpm | 8% |
| Peak Engine Power – hp (kW) | 513 (382) |
| Engine Torque Rise @ rpm | 42%@1400 |
| # Cylinders / # Valves | 6 / 24 |
| Displacement – cubic in. (L) | 928 (15.2 L) |
| Aspiration | Turbocharged / Air-to-Air Aftercooled |
| FUEL SYSTEM | |
| Fuel System | MEUI – ADEM™ 4 Full Electronic Control |
| Fuel Tank Capacity – US gal. (L) | 305 (1,155) |
| TRANSMISSION | |
| Type | Cat® Powershift 16F / 4R |
| Maximum Speed – mph (kph) | 24.6 (39.6) |
| Steering | Cat® Differential Steering |
| GAUGE OPTIONS | |
| GAUGE | Infinitely adjustable bar axle with smooth hardbar |
| Standard – in. (mm) | 90 – 128 (2,286 – 3,251) |
| BELT OPTIONS | |
| General Ag Belts – in. (mm) | 27.5, 30, 36 (698.5, 762, 914) |
| Extreme Application Belts – in. (mm) | 18, 30, 36 (457, 762, 914) |
| MOBIL-TRAC UNDERCARRIAGE | |
| Hardbar Suspension | Two Marsh Mellow® Springs |
| Undercarriage Suspension | Oscillating Bogie System w/ Suspended Midwheels |
| Hardbar Oscillation | Stabilizer Bar with 8° Range of Motion |
| PTO | |
| Independent PTO | 1000 RPM, 20 Spline, 1.75” (45 mm) |
| (Optional) | Electronically Controlled |
| ELECTRICAL SYSTEM | |
| Alternator | 185 amp |
| Batteries | (4) 1,000 cca 12 V |
| HYDRAULIC SYSTEM | |
| Type of System | Load Independent Flow Division (Closed-Center, Pressure-Flow Compensated) |
| Standard Pump Flow – gpm (lpm) | 43.5 (164.7) |
| Optional Pump Flow – gpm (lpm) | 59 (224.2) |
| Hydraulic Remotes | 4 Standard / up to 6 Optional |
| Max Flow at 1 Remote – gpm (lpm) | 36 (136.3) |
| Maximum System Pressure – psi (bar | 2,900 (200) |
| DRAWBAR | |
| Std. Wide Swing Drawbar | Roller Type +/- 32° Swing |
| Opt. Wide Swing Controlled Drawbar | Hydraulic Position Control / Dampening |
| Drawbar Load Rating – lbs. (kg) | 10,000 (4,536) |
| Category | Cat 4 (Std.) |
| 3-POINT HITCH | |
| Lift Capacity – lbs. (kg) | 19,500 (8,845) |
| Category | Category 3/4N |
| DIMENSIONS | |
| Wheelbase – in. (mm) | 118 (2,997) |
| Overall Width Wide Gauge – in. (mm) | 141.8 (3,601) |
| Overall Length – in. (mm) | 266 (6755) |
| Overall Height to Top of Cab – in. (mm) | 136 (3460) |
| Drawbar Clearance – in. (mm) | 14.4 (366) |
| Approx. Shipping Weight – lbs. (kg) | 41,000 (18,597) |
| Maximum Operating Weight – lbs. (kg) | 50,000 (22,680) |
Challenger MT865C Track Tractor
Challenger MT865C Tractor Price
- $443,568 USD
Challenger MT865C Tractor Key facts
- Engine: Cat® C18 ACERT™ Tier III
- Engine Power: 525 HP
- PTO Power: 425 HP
- Transmission: Cat® Powershift 16F / 4R
- Hydraulics System: Load Independent Flow Division (Closed-Center, Pressure-Flow Compensated)
- Lift Capacity: 8845
- Fuel tank capacity: 1,249 L
Challenger MT865C Tractor Specifications
| ENGINE | |
| Engine Type | Cat® C18 ACERT™ Tier III |
| Rated Engine Power – hp (kW) | 525 (391) |
| PTO Power @ rated 2100 rpm – hp (kW | 425 (316) |
| Engine Power Growth @ 1800 rpm | 8% |
| Peak Engine Power – hp (kW) | 567 (422) |
| Engine Torque Rise @ rpm | 42%@1400 |
| # Cylinders / # Valves | 6 / 24 |
| Displacement – cubic in. (L) | 1,105 (18.1 L) |
| Aspiration | Turbocharged / Air-to-Air Aftercooled |
| FUEL SYSTEM | |
| Fuel System | MEUI – ADEM™ 4 Full Electronic Control |
| Fuel Tank Capacity – US gal. (L) | 330 (1,249) |
| TRANSMISSION | |
| Type | Cat® Powershift 16F / 4R |
| Maximum Speed – mph (kph) | 24.6 (39.6) |
| Steering | Cat® Differential Steering |
| GAUGE OPTIONS | |
| GAUGE | Infinitely adjustable bar axle with smooth hardbar |
| Standard – in. (mm) | 90 – 128 (2,286 – 3,251) |
| BELT OPTIONS | |
| General Ag Belts – in. (mm) | 27.5, 30, 36 (698.5, 762, 914) |
| Extreme Application Belts – in. (mm) | 18, 30, 36 (457, 762, 914) |
| MOBIL-TRAC UNDERCARRIAGE | |
| Hardbar Suspension | Two Marsh Mellow® Springs |
| Undercarriage Suspension | Oscillating Bogie System w/ Suspended Midwheels |
| Hardbar Oscillation | Stabilizer Bar with 8° Range of Motion |
| PTO | |
| Independent PTO | 1000 RPM, 20 Spline, 1.75” (45 mm) |
| (Optional) | Electronically Controlled |
| ELECTRICAL SYSTEM | |
| Alternator | 185 amp |
| Batteries | (4) 1,000 cca 12 V |
| HYDRAULIC SYSTEM | |
| Type of System | Load Independent Flow Division (Closed-Center, Pressure-Flow Compensated) |
| Standard Pump Flow – gpm (lpm) | 43.5 (164.7) |
| Optional Pump Flow – gpm (lpm) | 59 (224.2) |
| Hydraulic Remotes | 4 Standard / up to 6 Optional |
| Max Flow at 1 Remote – gpm (lpm) | 36 (136.3) |
| Maximum System Pressure – psi (bar | 2,900 (200) |
| DRAWBAR | |
| Std. Wide Swing Drawbar | Roller Type +/- 32° Swing |
| Opt. Wide Swing Controlled Drawbar | Hydraulic Position Control / Dampening |
| Drawbar Load Rating – lbs. (kg) | 10,000 (4,536) |
| Category | Cat 4 (Std.) |
| 3-POINT HITCH | |
| Lift Capacity – lbs. (kg) | 19,500 (8,845) |
| Category | Category 3/4N |
| DIMENSIONS | |
| Wheelbase – in. (mm) | 118 (2,997) |
| Overall Width Wide Gauge – in. (mm) | 141.8 (3,601) |
| Overall Length – in. (mm) | 266 (6755) |
| Overall Height to Top of Cab – in. (mm) | 136 (3460) |
| Drawbar Clearance – in. (mm) | 14.4 (366) |
| Approx. Shipping Weight – lbs. (kg) | 42,200 (19,142) |
| Maximum Operating Weight – lbs. (kg) | 50,000 (22,680) |
Challenger MT875C Track Tractor
Challenger MT875C Tractor Price
- $473,854 USD
Challenger MT875C Tractor Key facts
- Engine: Cat® C18 ACERT™ Tier III
- Engine Power: 585 HP
- PTO Power: 425 HP
- Transmission: Cat® Powershift 16F / 4R
- Hydraulics System: Load Independent Flow Division (Closed-Center, Pressure-Flow Compensated)
- Lift Capacity: N/A
- Fuel tank capacity: 1,249 L
Challenger MT875C Tractor Specifications
| ENGINE | |
| Engine Type | Cat® C18 ACERT™ Tier III |
| Rated Engine Power – hp (kW) | 585 (436) |
| PTO Power @ rated 2100 rpm – hp (kW | 425 (316) |
| Engine Power Growth @ 1800 rpm | 8% |
| Peak Engine Power – hp (kW) | 631 (470) |
| Engine Torque Rise @ rpm | 42%@1400 |
| # Cylinders / # Valves | 6 / 24 |
| Displacement – cubic in. (L) | 1,105 (18.1 L) |
| Aspiration | Turbocharged / Air-to-Air Aftercooled |
| FUEL SYSTEM | |
| Fuel System | MEUI – ADEM™ 4 Full Electronic Control |
| Fuel Tank Capacity – US gal. (L) | 330 (1,249) |
| TRANSMISSION | |
| Type | Cat® Powershift 16F / 4R |
| Maximum Speed – mph (kph) | 24.6 (39.6) |
| Steering | Cat® Differential Steering |
| GAUGE OPTIONS | |
| GAUGE | Infinitely adjustable bar axle with smooth hardbar |
| Standard – in. (mm) | 90 – 128 (2,286 – 3,251) |
| BELT OPTIONS | |
| General Ag Belts – in. (mm) | 27.5, 30, 36 (698.5, 762, 914) |
| Extreme Application Belts – in. (mm) | 18, 30, 36 (457, 762, 914) |
| MOBIL-TRAC UNDERCARRIAGE | |
| Hardbar Suspension | Two Marsh Mellow® Springs |
| Undercarriage Suspension | Oscillating Bogie System w/ Suspended Midwheels |
| Hardbar Oscillation | Stabilizer Bar with 8° Range of Motion |
| PTO | |
| Independent PTO | 1000 RPM, 20 Spline, 1.75” (45 mm) |
| (Optional) | Electronically Controlled |
| ELECTRICAL SYSTEM | |
| Alternator | 185 amp |
| Batteries | (4) 1,000 cca 12 V |
| HYDRAULIC SYSTEM | |
| Type of System | Load Independent Flow Division (Closed-Center, Pressure-Flow Compensated) |
| Standard Pump Flow – gpm (lpm) | 43.5 (164.7) |
| Optional Pump Flow – gpm (lpm) | 59 (224.2) |
| Hydraulic Remotes | 4 Standard / up to 6 Optional |
| Max Flow at 1 Remote – gpm (lpm) | 36 (136.3) |
| Maximum System Pressure – psi (bar | 2,900 (200) |
| DRAWBAR | |
| Std. Wide Swing Drawbar | Roller Type +/- 32° Swing |
| Opt. Wide Swing Controlled Drawbar | Hydraulic Position Control / Dampening |
| Drawbar Load Rating – lbs. (kg) | 10,000 (4,536) |
| Category | Cat 4 (Std.) |
| 3-POINT HITCH | |
| Lift Capacity – lbs. (kg) | N/A |
| Category | N/A |
| DIMENSIONS | |
| Wheelbase – in. (mm) | 118 (2,997) |
| Overall Width Wide Gauge – in. (mm) | 141.8 (3,601) |
| Overall Length – in. (mm) | 266 (6755) |
| Overall Height to Top of Cab – in. (mm) | 136 (3460) |
| Drawbar Clearance – in. (mm) | 14.4 (366) |
| Approx. Shipping Weight – lbs. (kg) | 42,200 (19,142) |
| Maximum Operating Weight – lbs. (kg) | 50,000 (22,680) |
We are thankful to all people who visited our site if you have any query regarding this article then please leave a comment from below the comment box. We welcome your suggestion and apply changes immediately. We can update this model’s information if we have new information about it.