John Deere D160 Specs: The John Deere D160 is a lawn mover tractor, that was built in Greeneville, Tennessee, USA. It has a 25HP Briggs & Stratton 724cc 2-cylinder gasoline engine and a Hydrostatic transmission.
The original price of the D160 was $2,349 in 2015. The fuel tank has a capacity of 4 gallons (15.1 L), or 2.4 gallons (9.1 L) for the California Model.
The D160 has a Wheelbase of 48.9 inches (124 cm) and weighs 525 lbs (238 kg). It comes with a 48-inch mid-mount mower deck and can attach a snowblower or blade.
Below are the key Specs, price, weight, Horsepower, and details about the John Deere 2950:
John Deere D160 Specs
| Production | |
| Manufacturer | John Deere |
| Lawn tractor | |
| Built in Greeneville, Tennessee, USA | |
| Original price | $2,599 (2011 ) |
| $2,349 (2015 ) | |
| John Deere D160 Serial Numbers | |
| Location: | Serial number on rear of tractor, left side, under fender. |
| 2011 | B100001 |
| 2012 | C300001 |
| 2013 | D400001 |
| 2014 | E500001 |
| 2015 | F600001 |
| 2016 | G700001 |
| 2017 | H810001 |
| John Deere D160 Engine | |
| 25HP Briggs & Stratton 724cc 2-cyl gasoline | |
| Fuel tank | 4 gal 15.1 L |
| 2.4 gal* 9.1 L | |
| John Deere D160 Engine Detail | |
| Briggs & Stratton ELS 44 | |
| gasoline | |
| 2-cylinder | |
| air-cooled vertical-shaft V-Twin | |
| The Deere D160 was rated at 24 HP until 2014. From 2014 on, it was rated at 25 HP. | |
| Displacement | 724 cc 44.2 ci |
| Bore/Stroke | 3.12×2.89 inches 79 x 73 mm |
| Power (gross) | 25 hp 18.6 kW |
| Air cleaner | cartridge with foam pre-cleaner |
| Starter | electric |
| Starter volts | 12 |
| Oil capacity | 2 qts 1.9 L |
| Sparkplug gap | 0.030 inches 0.762 mm |
| Point gap | 0.009 inches 0.229 mm |
| Intake valve clearance | 0.005 inches 0.127 mm |
| Exhaust valve clearance | 0.005 inches 0.127 mm |
You can also check here: John Deere D110
| John Deere D160 Mechanical | |
| Two-wheel drive | |
| Manual steering | |
| Mechanical shoe on transaxle brakes | |
| Open operator station. Adjustable 15-inch tall seat with 5.5-inches of travel in ten positions and lumbar adjustment. Fender-mounted cup holder. Optional nylon sunshade canopy or snow enclosure. Optional 12-volt power outlet. |
| John Deere D160 Power Take-off (PTO) | |
| Front PTO | independent |
| Clutch | electric |
| John Deere D160 Dimensions & Tires | |
| Wheelbase | 48.9 inches 124 cm |
| Weight | 525 lbs 238 kg |
| Front tire | 16×6.5-8 |
| Rear tire | 22×9.5-12 |
| John Deere D160 Electrical | |
| Ground | negative |
| Charging system | alternator |
| Charging amps | 16 |
| Battery volts | 12 |
| Battery Group | U1 |
| John Deere D160 Transmission | |
| Transmission | Tuff Torq HD K46 |
| Type | belt-driven hydrostatic |
| Gears | infinite forward and reverse |
| Oil change | sealed unit, owner service is not recommended |
| Hydrostatic transmission with right-side accelerator and decelerator/reverse foot pedals. Left-side brake pedal. Cruise control is standard equipment. | |
| John Deere D160 Tires | |
| Lawn/turf front | 16×6.5-8 |
| Lawn/turf rear | 22×9.5-12 |
Also, check here: John Deere 5055E
| John Deere D160 Dimensions | |
| Wheelbase | 48.9 inches 124 cm |
| Length | 69.25 inches 175 cm |
| Width | 60 inches (mower) 152 cm |
| Height | 45 inches 114 cm |
| Weight | 525 lbs* 238 kg |
John Deere D160 Loader Attachments
| John Deere D160 Attachment overview | |
| 48″ mid-mount mower deck | |
| Snowblower | |
| Blade |
| 48″ Mower deck | |
| Type | mid-mount John Deere Edge 48 |
| 3-blade with manual with spring assist lift | |
| Cutting width | 48 inches 121 cm |
| Overall width | 60 inches 152 cm |
| Cut height | 1 to 4 inch 2 to 10 cm |
| Cut positions | 13 |
| 46″ Blade |
| John Deere 46 |
| front-mount |
| 46 inches width 116 cm |
| 6.5 inches lift 16 cm |
| manual-lift |
| manual-angle |
| 43.25″ Snow blower |
| John Deere 44 |
| 43.25 inches width 109 cm |
| dual-stage |
| Total width:44 inches 111 cm |
| Clear height:18 inches 45 cm |
| front-mount |
| 180 lbs 81 kg |