Here in this post, I have gathered information about the John Deere 40 from its official website, including its specs, weight, price, Horsepower, fuel capacity, lift capacity, and dimensions.
We believe in providing reliable information to our readers, therefore we prefer to obtain information on the John Deere 40 from authentic sources.
This article, which has been updated, has all the information you require about the John Deere 40.
John Deere 40 Price New and Used
| Country | John Deere 40 New Price | John Deere 40 Used Price |
|---|---|---|
| United States | $25,000 – $35,000 | $10,000 – $20,000 |
| Canada | $30,000 – $40,000 | $12,000 – $22,000 |
| United Kingdom | £18,000 – £25,000 | £8,000 – £15,000 |
| Australia | $35,000 – $45,000 | $15,000 – $25,000 |
John Deere 40 Weight
The John Deere 40 has a total weight of 1810 kg (3990 lbs).
John Deere 40 Horsepower
The John Deere 40 has a 40-horsepower diesel engine.
John Deere 40 Fuel Capacity
The John Deere 40 has a fuel capacity of 60 liters (15.8 gallons).
John Deere 40 Lift Capacity
The John Deere 40 has a lift capacity of 1600 kg (3527 lbs).
John Deere 40 Oil capacity
The John Deere 40 has a crankcase oil capacity of 8.5 liters (9.1 quarts).
John Deere 40 Serial Numbers
| 1953 | 60001 (Standard) |
| 1954 | 67359 (Standard) |
| 1955 | 69474 (Standard) |
| 1953 | 60001 (Tricycle) |
| 1954 | 72167 (Tricycle) |
| 1955 | 75531 (Tricycle) |
| 1953 | 60001 (Utility) |
| 1954 | 60202 (Utility) |
| 1955 | 63140 (Utility) |
| 1954 | 60001 (Hi-Crop) |
| 1955 | 60060 (Hi-Crop) |
John Deere 40 Specs
| Production | |
| Manufacturer | John Deere |
| Utility tractor | |
| Built in Dubuque, Iowa, USA | |
| Total built | 18,000 |
| The original price was $1,500 in 1954 | |
| Engine Detail | |
| John Deere | |
| gasoline | |
| 2-cylinder 4-valve | |
| liquid-cooled | |
| Displacement | 100.5 ci 1.6 L |
| Bore/Stroke | 4.00×4.00 inches 102 x 102 mm |
| Air cleaner | oil bath |
| Compression | 6.5:1 |
| Rated RPM | 1850 |
| Firing order | 1-2 |
| Starter volts | 6 |
| Oil capacity | 5 qts 4.7 L |
| Coolant capacity | 14 qts 13.2 L |
| Engine Detail | |
| John Deere | |
| all-fuel | |
| 2-cylinder 4-valve | |
| liquid-cooled | |
| Displacement | 100.5 ci 1.6 L |
| Bore/Stroke | 4.00×4.00 inches 102 x 102 mm |
| Air cleaner | oil bath |
| Compression | 6.5:1 |
| Rated RPM | 1850 |
| Firing order | 1-2 |
| Starter volts | 6 |
| Oil capacity | 5 qts 4.7 L |
| Sparkplug gap | 0.025 inches 0.635 mm |
| Point gap | 0.022 inches 0.559 mm |
| Intake valve clearance | 0.012 inches (cold) 0.305 mm |
| Exhaust valve clearance | 0.012 inches (cold) 0.305 mm |
| Transmission | |
| Manufacturer | John Deere |
| Type | gear |
| Gears | 4 forward and 1 reverse |
| Clutch | dry disc |
| John Deere 40 Power | |
| Drawbar (claimed) | 16.77 hp 12.5 kW |
| Belt (claimed) | 21.13 hp 15.8 kW |
| Drawbar (tested) | 21.71 hp 16.2 kW |
| Belt (tested) | 24.25 hp 18.1 kW |
| John Deere 40 Tires | |
| Ag front | 5.00-15 |
| 6.00×16 | |
| Ag rear | 9-24 (40S) |
| 10-24 (40S/U) | |
| 11-24 (40S/U) | |
| 11-26 (40U) | |
| 13-26 (40U) | |
| 9-34 (40W/T/V) | |
| 10-34 (40W/V/T) | |
| 10-38 (40H) | |
| 11-38 (40H) | |
| Mechanical | |
| Two-wheel drive | |
| Manual steering | |
| Open operator station |
| Belt Pulley | |
| Diameter | 9.1 inches 23 cm |
| Width | 6.375 inches 16 cm |
| RPM | 1267 |
| Speed | 3006 ft/min 916.23 meters/min |
| Electrical | |
| Ground | positive |
| Battery volts | 6 |
| Power Take-off (PTO) | |
| Rear PTO | transmission |
| Rear RPM | 540 |
| Dimensions | |
| Length | 130.625 inches 331 cm |
| 114.75 inches (40S) 291 cm | |
| Width | 89.75 inches 227 cm |
| 55.5 inches (40S) 140 cm | |
| Height | 58.75 inches 149 cm |
| 56 inches (40S) 142 cm | |
| Front tread | 39.125 to 54 inches 99 to 137 cm (40S) |
| Rear tread | 47.25 to 96 inches 120 to 243 cm (40T) |
| Rear tread | 38.75 to 54.128 inches 98 to 137 cm (40S) |
| John Deere 40 Weight | |
| 40S Operating | 2900 lbs 1315 kg |
| 40T Operating | 3220 lbs 1460 kg |
| 40S Ballasted | 4189 lbs 1900 kg |
| 40T Ballasted | 4553 lbs 2065 kg |
John Deere 40 Attachments
30 Loader
| Feature | Measurement | Metric Equivalent |
|---|---|---|
| Loader Capacity | 800 lbs | 362 kg |
| Breakout Force | 1400 lbs | 635 kg |
| Height (at Pin) | 114 inches | 289 cm |
| Bucket Width | 34 inches | 86 cm |
40 Loader
| Feature | Measurement | Metric Equivalent |
|---|---|---|
| Loader Capacity | 800 lbs | 362 kg |
| Breakout Force | 1800 lbs | 816 kg |
| Height (at Pin) | 114 inches | 289 cm |
| Bucket Width | 36 inches | 91 cm |
John Deere 40 Review
The John Deere 40 is a tow-behind that cherator that is designed to remove thatch from lawns. It is a well-built machine that is easy to use and produces excellent results.
Final Thoughts
That was all about the John Deere 40 Price, Specs, Weight, Review, and Key Features, but if you have any queries regarding this post, then please comment below in the comment box, We will solve your problem as soon as possible, thanks for visiting our site and stay tuned to our site for more new stuff like this.