John Deere 6E Series Tractors Price, Specs & Features 2024

2024 John Deere 6E Series Price, Specs, Review, Attachments, Features, Overview

The John Deere 6E Series Utility tractors made to meet your requirements like Simple, intuitive controls, Economical to own and operate, Unsurpassed fluid efficiency, and easy to maintain for maximum uptime.

Lift capacity for the 6E Series 3-point hitch is an excellent 2494 kg at 24 inches behind the lift point, with an optional 3311 kg of lift capability available. 

So, here in this article, you can get to know about the Versatile, Reliable, and Economical John Deere New 6E Series 105-135 Engine horsepower utility tractors information like that price, Specification, key features, images and more.

Ok friends, let’s check it out it’s more information below.

John Deere 6105E Utility Tractor

John Deere 6105E Utility Tractor

John Deere 6105E Price

  • $73,500.

John Deere 6105E Tractor Key Features

  • FT4 John Deere PowerTech™ engine
  • 12/12 or 24/12 hi-lo PowrReverser™ transmission system
  • Cab, open station, 2WD or MFWD
  • 15 degrees of seat swivel with optional air-ride seat
  • Rated PTO power (89 hp SAE) at engine speed (2100 erpm)
  • Rated Engine power 105 hp (hp ISO) at 2200 engine rpm (97/68EC)*

John Deere 6105E Specs

POWER * estimated
Rated PTO power (hp SAE) at engine speed (2100 erpm) 89 hp (66 kW)
Rated Engine power hp (hp ISO) at 2200 engine rpm (97/68EC)* 105 hp (77 kW)
Engine Peak Torque (Nm) (xx% @ 1600rpm) 432 N-m (318 lb.-ft)
Constant Power Range (rpm) 1800 – 2200 rpm
ENGINE
Manufacturer (US EPA Interim Tier4/EU Stage IIIb) PowerTech™ PWL (B20 Diesel Compatible)
Rated Speed 2,200 rpm
Type Diesel, in-line, 4-cylinder, wet-sleeve cylinder liners with 4 valves-in-head
Aspiration (US EPA Interim Tier4/EU Stage IIIb) Wastegate turbocharger with air-to-air aftercooling and cooled exhaust gas recirculation
Filter, engine air Dual stage with aspiration
Displacement 275 cu. In. (4.5L)
Bore and stroke 4.17 in. (106 mm) x 5.00 in. (127 mm)
Compression ratio 16.8:1
Lubrication Full-pressure, full-fow fltration with bypass
Filter, oil Replaceable cartridge style oil flter
TRANSMISSION
12F/12R Top Shaft Synchronized (TSS) Transmission w/ PowrReverser (30K) Standard
24F/12R Top Shaft Synchronized (TSS) Transmission w/PowrReverser and Hi Lo (40 k) Option
AXLES
Rear Axle Final Drive Inboard planetary
Rear Axle – Flange Standard
2WD – tread range 60.4 to 80.4 in. (1533 to 2043 mm) Optional
MFWD – tread range 59.7 to 79.4 in. (1516 to 2016 mm) Standard
DIFFERENTIAL LOCK
Front Axle – 2WD N/A
Front Axle – MFWD Limited Slip
Rear Axle – Full-Locking mechanical Standard
HYDRAULIC SYSTEM (type)
Selective control valves 2 Mechanical SCVs Standard; 3 Mechanical SCVs Optional
Main pump, axial piston (displacement) 36.5 cc
Maximum pressure 2,828 psi (19,500 kPa)
Rated fow (@ 90% Advertised Effciency 20 US gpm/75.7 lpm
Available fow at a single SCV 20 US gpm/75.7 lpm
3-POINT HITCH (rear) – Electrohydraulic Sensing
Category 2 (5500 lbs (2500 kg) Standard Lift @ 610mm behind hitchpoint) Standard
Category 2 (7300 lbs (3318 kg) Heavy Duty Lift @ 610mm behind hitchpoint) Optional
Draft Sensing Optional
DRAWBAR
Cat 2 1000 kg (2205 lb.) – 1250 kg (2756 lb.) Maximum Vertical Load dependent on drawbar position Standard
Cat 2 1200 kg (2645 lb.) – 1900 kg (4189 lb.) Maximum Vertical Load dependent on drawbar position Optional
PTO (power take off) Independent
1-3/8 in., 540/1000 reversible shaft Standard
PTO Speed @ Engine RPM 540 PTO @ 2085 Engine rpm or 1000 PTO @ 2067 Engine rpm
WHEELBASE
2WD 96.7 in. (2456 mm)
MFWD 96.5 in. (2450 mm)
Max Ballast Level 14250 lb (6464 kg)
Max Payload Capacity 17636 lb (8000 kg)
 

John Deere 6120E Utility Tractor

John Deere 6120E Utility Tractor

John Deere 6120E Price

  • $74,700.

John Deere 6120E Tractor Key Features

  • FT4 John Deere PowerTech™ engine
  • 12/12 or 24/12 hi-lo PowrReverser™ transmission system
  • Cab, open station, 2WD or MFWD
  • 15 degrees of seat swivel with optional air-ride seat
  • Rated PTO power (102 hp SAE) at engine speed (2100 erpm)
  • Rated Engine power 120 hp (hp ISO) at 2200 engine rpm (97/68EC)*

John Deere 6120E Specs

POWER * estimated
Rated PTO power (hp SAE) at engine speed (2100 erpm) 102 hp (76 kW)
Rated Engine power hp (hp ISO) at 2200 engine rpm (97/68EC)* 120 hp (88 kW)
Engine Peak Torque (Nm) (xx% @ 1600rpm) 494 N-m (364 lb.-ft)
Constant Power Range (rpm) 1800 – 2200 rpm
ENGINE
Manufacturer (US EPA Interim Tier4/EU Stage IIIb) PowerTech™ PWL (B20 Diesel Compatible)
Rated Speed 2,200 rpm
Type Diesel, in-line, 4-cylinder, wet-sleeve cylinder liners with 4 valves-in-head
Aspiration (US EPA Interim Tier4/EU Stage IIIb) Wastegate turbocharger with air-to-air aftercooling and cooled exhaust gas recirculation
Filter, engine air Dual stage with aspiration
Displacement 275 cu. In. (4.5L)
Bore and stroke 4.17 in. (106 mm) x 5.00 in. (127 mm)
Compression ratio 16.8:1
Lubrication Full-pressure, full-fow fltration with bypass
Filter, oil Replaceable cartridge style oil flter
TRANSMISSION
12F/12R Top Shaft Synchronized (TSS) Transmission w/ PowrReverser (30K) Standard
24F/12R Top Shaft Synchronized (TSS) Transmission w/PowrReverser and Hi Lo (40 k) Option
AXLES
Rear Axle Final Drive Inboard planetary
Rear Axle – Flange Standard
2WD – tread range 60.4 to 80.4 in. (1533 to 2043 mm) Optional
MFWD – tread range 59.7 to 79.4 in. (1516 to 2016 mm) Standard
DIFFERENTIAL LOCK
Front Axle – 2WD N/A
Front Axle – MFWD Limited Slip
Rear Axle – Full-Locking mechanical Standard
HYDRAULIC SYSTEM (type)
Selective control valves 2 Mechanical SCVs Standard; 3 Mechanical SCVs Optional
Main pump, axial piston (displacement) 36.5 cc
Maximum pressure 2,828 psi (19,500 kPa)
Rated fow (@ 90% Advertised Effciency 20 US gpm/75.7 lpm
Available fow at a single SCV 20 US gpm/75.7 lpm
3-POINT HITCH (rear) – Electrohydraulic Sensing
Category 2 (5500 lbs (2500 kg) Standard Lift @ 610mm behind hitchpoint) Standard
Category 2 (7300 lbs (3318 kg) Heavy Duty Lift @ 610mm behind hitchpoint) Optional
Draft Sensing Optional
DRAWBAR
Cat 2 1000 kg (2205 lb.) – 1250 kg (2756 lb.) Maximum Vertical Load dependent on drawbar position Standard
Cat 2 1200 kg (2645 lb.) – 1900 kg (4189 lb.) Maximum Vertical Load dependent on drawbar position Optional
PTO (power take off) Independent
1-3/8 in., 540/1000 reversible shaft Standard
PTO Speed @ Engine RPM 540 PTO @ 2085 Engine rpm or 1000 PTO @ 2067 Engine rpm
WHEELBASE
2WD 96.7 in. (2456 mm)
MFWD 96.5 in. (2450 mm)
Max Ballast Level 14250 lb (6464 kg)
Max Payload Capacity 17636 lb (8000 kg)
 

John Deere 6135E Utility Tractor

John Deere 6135E Utility Tractor

John Deere 6135E Price

  • $84,900.

John Deere 6135E Tractor Key Features

  • FT4 John Deere PowerTech™ engine
  • 12/12 or 24/12 hi-lo PowrReverser™ transmission system
  • Cab, 2WD or MFWD
  • 15 degrees of seat swivel with optional air-ride seat
  • Rated PTO power (115 hp SAE) at engine speed (2100 erpm)
  • Rated Engine power 135 hp (hp ISO) at 2200 engine rpm (97/68EC)*

John Deere 6135E Specs

POWER * estimated
Rated PTO power (hp SAE) at engine speed (2100 erpm) 115 hp (86 kW)
Rated Engine power hp (hp ISO) at 2200 engine rpm (97/68EC)* 135 hp (99 kW)
Engine Peak Torque (Nm) (xx% @ 1600rpm) 539 N-m (397 lb.-ft)
Constant Power Range (rpm) 1900 – 2200 rpm
ENGINE
Manufacturer (US EPA Interim Tier4/EU Stage IIIb) PowerTech™ PWS (B20 Diesel Compatible)
Rated Speed 2,200 rpm
Type Diesel, in-line, 4-cylinder, wet-sleeve cylinder liners with 4 valves-in-head
Aspiration (US EPA Interim Tier4/EU Stage IIIb) Wastegate turbocharger with air-to-air aftercooling and cooled exhaust gas recirculation
Filter, engine air Dual stage with aspiration
Displacement 275 cu. In. (4.5L)
Bore and stroke 4.17 in. (106 mm) x 5.00 in. (127 mm)
Compression ratio 16.8:1
Lubrication Full-pressure, full-fow fltration with bypass
Filter, oil Replaceable cartridge style oil flter
TRANSMISSION
12F/12R Top Shaft Synchronized (TSS) Transmission w/ PowrReverser (30K) Standard
24F/12R Top Shaft Synchronized (TSS) Transmission w/PowrReverser and Hi Lo (40 k) Option
AXLES
Rear Axle Final Drive Inboard planetary
Rear Axle – Flange Standard
2WD – tread range 60.4 to 80.4 in. (1533 to 2043 mm) N/A
MFWD – tread range 59.7 to 79.4 in. (1516 to 2016 mm) Standard
DIFFERENTIAL LOCK
Front Axle – 2WD N/A
Front Axle – MFWD Limited Slip
Rear Axle – Full-Locking mechanical Standard
HYDRAULIC SYSTEM (type)
Selective control valves 2 Mechanical SCVs Standard; 3 Mechanical SCVs Optional
Main pump, axial piston (displacement) 36.5 cc
Maximum pressure 2,828 psi (19,500 kPa)
Rated fow (@ 90% Advertised Effciency 20 US gpm/75.7 lpm
Available fow at a single SCV 20 US gpm/75.7 lpm
3-POINT HITCH (rear) – Electrohydraulic Sensing
Category 2 (5500 lbs (2500 kg) Standard Lift @ 610mm behind hitchpoint) Standard
Category 2 (7300 lbs (3318 kg) Heavy Duty Lift @ 610mm behind hitchpoint) Optional
Draft Sensing Optional
DRAWBAR
Cat 2 1000 kg (2205 lb.) – 1250 kg (2756 lb.) Maximum Vertical Load dependent on drawbar position Standard
Cat 2 1200 kg (2645 lb.) – 1900 kg (4189 lb.) Maximum Vertical Load dependent on drawbar position Optional
PTO (power take off) Independent
1-3/8 in., 540/1000 reversible shaft Standard
PTO Speed @ Engine RPM 540 PTO @ 2085 Engine rpm or 1000 PTO @ 2067 Engine rpm
WHEELBASE
2WD 96.7 in. (2456 mm)
MFWD 96.5 in. (2450 mm)
Max Ballast Level 14250 lb (6464 kg)
Max Payload Capacity 17636 lb (8000 kg)
 

You May Also Like To Check:

[/mmtl-text][/mmtl-col][/mmtl-row]

Leave a Comment