John Deere 4010 Specs – The John Deere 4010 was an American Row-Crop tractor in production by the John Deere from 1960 to 1963.
The John Deere 4010 tractor was the primary attraction of the new “10” series known as the “New Generation of Power” or “New Generation”,
which consisted of four and 6-cylinder tractors first introduced in 1959 to replace the 2-cylinder tractors which led to the grand success of John Deere as a tractor company until that time.
The “10” series tractors were dramatically presented to John Deere dealers on 30 August 1960, when dealers from around the globe were invited to Texas, Dallas, where the entire new series was debuted at the Dallas Memorial Auditorium.
The John Deere 4010 tractor was rated at 80 HP in 1960 but tested at 84 HP during Nebraska field testing trials making it one of the most potent two-wheel-drive farm tractors.
The John Deere 4010 tractor was the forerunner to the John Deere 4020, widely regarded as the most famous tractor ever manufactured by John Deere and perhaps any other tractor manufacturer in the USA.
Now, let’s check out the John Deere 4010 Price, Specs, Features and images.
John Deere 4010 Price, History, Serial Numbers, HP, Weight
Original Price: $5,500 (1963)
John Deere 4010 History
| Manufacturer: | John Deere |
| Type: | Row-Crop tractor |
| Factories: | Waterloo, Iowa, USA |
| Mexico | |
| Original price: | $5,500 (1963) |
John Deere 4010 Serial Numbers
| Location: | Serial number plate on the rear of the tractor, above the PTO shaft. |
| 1961: | 1000 |
| 1962: | 20201 |
| 1963: | 38200 |
| Final: | 59316 |
John Deere 4010 Specs
John Deere 4010 Engine:
| Engine Overview | John Deere 4.9L 6-cyl gasoline John Deere 6.2L 6-cyl diesel John deere 4.9L 6-cyl LP gas |
| Engine | John Deere gasoline 6-cylinder liquid-cooled |
| Displacement: | 302 ci 4.9 L |
| Bore/Stroke: | 4.00×4.00 inches 102 x 102 mm |
| Compression: | 7.5:1 |
| Rated RPM: | 2200 |
| Starter volts: | 12 |
| Coolant capacity: | 24 qts 22.7 L |
John Deere 4010 Power:
| PTO (claimed): | 80 hp 59.7 kW |
| Drawbar (tested): | 71.93 hp 53.6 kW |
| PTO (tested): | 84.00 hp 62.6 kW |
John Deere 4010 Hydraulics
| Type: | closed center |
| Valves: | 2 |
| Pump flow: | 13 gpm 49.2 lpm |
John Deere 4010 PTO
| PTO (claimed): | 80 hp 59.7 kW |
| Drawbar (tested): | 71.93 hp 53.6 kW |
| PTO (tested): | 84.00 hp 62.6 kW |
John Deere 4010 Mechanical
| Chassis: | 4×2 2WD |
| Steering: | power assist |
| Brakes: | differential hydraulic wet disc |
| Cab: | Open operator station. |
| Transmission: | 8-speed partially synchronized |
John Deere 4010 Transmission
| Transmission: | John Deere Syncro-Range |
| Type: | partially synchronized |
| Gears: | 8 forward and 3 reverse |
| Clutch: | dry disc |
Also Check:
John Deere 4010 Dimensions
| Wheelbase: | 99.25 inches 252 cm |
| Operating weight: | 7,100 lbs 3220 kg |
| Ballasted weight: | 9,595 lbs 4352 kg |
| Rear axle: | 3.125 inch diameter 79 mm |
| Front tread: | 8.375 to 18.25 inches 21 to 46 cm (tricycle) |
| Rear tread: | 60 to 88 inches 152 to 223 cm |
John Deere 4010 Tires
| Ag front: | 6.00-16 |
| Ag rear: | 13.6-38 |
John Deere 4010 Electrical
| Ground: | positive (12V) |
| floating (24V) | |
| Batteries: | 1 (gas) |
| 2 (diesel) | |
| Battery volts: | 12 |
Also Check:
- John Deere 3010
- John Deere LX176
- John Deere 160
- John Deere 265
- John Deere L111
- John Deere L130
- John Deere LA145
That was all about the John Deere 4010 Price, Specs & Images. I hope you like this post, and it’s helped you a lot, but if you are facing any issue related to this John Deere 4010 Tractor then feel free to leave a comment I like helping everyone. Thanks!