Toyota 3S-GTE 2.0T Engine
Here in this article, you will learn more about the Toyota 3S-GTE 2.0T Engine Specs, its Performance, Cylinder Heads, and Cam Specs & More Let’s discuss the Toyota 3S-GTE 2.0T Engine, Problems, Reliability, and Reviews.
Toyota manufactured the 3S-GTE from 1986 to 2007. It is a 2.0-litre inline-4 turbocharged gasoline engine. This motor is based on Toyota’s 3S-GE series, which features a naturally aspirated variant.
Toyota supplied this 2.0-litre turbo engine in the ST165, ST185, and ST205 Celica, as well as the MR2 and Caldina GT-T/GT-Four.
The turbocharged version of the 3S-GE has the same cast iron cylinder block, forged crankshaft and connecting rods, and lightweight aluminium pistons.
The 3SGTE is distinct from the 3SGE because of the lower compression ratio used for turbocharging and the inclusion of piston oil jets (squirters) within the cylinder block.
Yamaha designed an aluminium cylinder head that sits on top of the block.
The aluminium alloy, 16-valve DOHC cylinder head features centrally-placed spark plugs and pent-roof combustion chambers.
Additionally, the engine utilizes a timing belt and solid buckets in the valvetrain (valve clearance is changed by placing shims over or under the buckets).
Exhaust valves are 29.0 mm (1.15 in) in diameter, while intake valves measure 33.5 mm (1.32 in) (1.14 in).
Engine | Toyota 3S-GTE |
Configuration | Inline-4 |
Displacement | 1,998cc (2.0L) |
Aspiration | Turbocharged |
Block Material | Cast Iron |
Head Material | Aluminium |
Valvetrain | DOHC, 16 valves |
Bore x Stroke | 86mm x 86mm |
Compression Ratio | 8.5: 1 to 9.0: 1 |
Horsepower | 182-256 HP |
Torque (lb-ft) | 184-239 TQ |
Toyota 3S-GTE Performance
We aren’t really interested in the stock performance of the Toyota Celica and MR2 3S-GTE models.
Unfortunately, we won’t be discussing detailed performance indicators.
There is an excessive amount of variation in 0–60 times, quarter-mile times, and other performance metrics.
Naturally, the latter engines are faster right out of the factory. The output of 3S-GTEs has grown steadily over time.
The 2.0-litre turbocharged inline-four is factory installed and ready to go. The 3SGTE engine is very powerful for its time period. But the power of the engines is what makes them so appealing.
The 2.0-litre turbocharged engine has substantial potential thanks to its cast-iron block and sturdy internals. The 3S-GTE turbo engine may be upgraded with very simple tuning and bolt-on upgrades.
Toyota 3S-GTE 2.0T Engine Problems
Block Problems with Toyota’s 2.0-litre Inline-4 Engine
The problem of cracked engine blocks in Toyota 3S-GTE engines is a fascinating one.
Cast iron is used for the block. Because of the exceptional durability of cast iron, this is one of the most popular styles.
However, 2.0 turbo inline-4 engines are notorious for having block failures. While block cracking is more likely in 3-cylinder engines built before 1997, it is not exclusive to 3-cylinder engines.
The gap between cylinders 2 and 3 looks to be where most of the trouble is occurring. Unfortunately, the thin casting in that spot makes the block susceptible to fracture.
To reduce the frequency of engine failures, Toyota reinforced the block in later models. Furthermore, engine blocks in 3S-GTE vehicles almost never shatter when running completely stock.
Higher cylinder pressures are a common cause of this problem in modified engines.
- Smoke from engine
- Overheating
- Leaking oil and/or coolant
Oil Leakage Issues on the 3S-GTE 2.0 Turbo
This will be followed by a discussion of issues with oil leaks in the Toyota 3S-GTE engine. The 2.0-litre turbocharged inline-four engine has no serious design defects or other issues that would cause oil leaks.
It is inevitable that gaskets, seals, and other engine components will wear out over time.
Since this is the case, the causes of oil leaks in 3S-GTE vehicles are primarily related to their age and mileage.
Components made of rubber wear out quickly after a lot of use. Old age causes these gaskets and seals to dry out and crack, leading to oil leaks.
The primary seals, oil pan, and valve cover gasket are frequent sources of oil leaks.
- Burning oil smells
- Low engine oil
Correcting the oil leak in the 3S-GTE
The 3SGTE 2.0 inline-4 engine’s oil leaks aren’t all bad news, either. Most leaks occur at the gasket or seal, which can cost anywhere from $5 to $25 to replace.
That’s why oil leaks are a relatively easy and inexpensive fix for the do-it-yourself population that doesn’t mind spending a day in the garage.
However, labour costs can add up if you end up in a repair shop. Expect to spend between $150 and $300 on labour to fix a leaking oil pan on a 3S-GTE engine.
However, the cost to repair a major leak in an inconvenient location might skyrocket.
Issues with the Toyota 3S-GTE Turbo
turbocharger problems with the Toyota 3S-GTE powerplant. Given that turbos are rather dependable, we can wrap up this discussion quickly.
However, they are prone to wear and tear because they experience so much use. Because the 3SGTE engine is so flexible, this is especially true.
Failures in the Toyota 2.0L inline-4 turbo are typically associated with advanced age. The average age of one of these engines on the road now is well over twenty years, which is ancient for a turbo.
Many 3S-GTE engines have probably already been upgraded to a new turbo if they have been altered before. If your turbo ever stops working, you have a valid reason to upgrade.
- Excessive smoking
- Turbo whining sounds
Toyota 3S-GTE Reliability
Is it true that Toyota’s 3S-GTE engine can always be counted on? It’s true that we think this engine is more reliable than average.
When it comes to dependability and durability, turbocharged engines have a poor track record. That was especially the case in the ’80s and ’90s.
However, Toyota’s 3S-GTE engine is quite well made. With the exception of the Gen 3 engine block, it lacks any seriously flawed components.
If you plan on customizing or upgrading your 3S-GTE engine, be wary of the block shattering. Other frequent problems include oil leaks and turbo failures.
However, these issues are more often associated with advanced age than with any serious defects in the 3SGTE itself.
Maintenance plays a significant role in ensuring dependability. Always use premium synthetic oils, maintain regular fluid changes, and address issues as soon as possible.
All cars, not just the 3S-GTE, need these maintenance items.
It’s not unusual for a Toyota 3S-GTE 2.0 inline-4 engine to last for more than 250,000 miles with regular maintenance.
Engines can be modified to the point where they can get such mileage with relatively few problems.
Toyota 3S-GTE 2.0T Engine FAQ
Is the 3S-GTE a good engine?
The 3SGTE engine is very powerful for its time period. But the power of the engines is what makes them so appealing.
The 2.0-litre turbocharged engine has substantial potential thanks to its cast-iron block and sturdy internals. The 3S-GTE turbo engine may be upgraded with very simple tuning and bolt-on upgrades.
What is the difference between 3SGE and 3SGTE?
those rays The 3SGTE (with oil squirters) is identical to the 3SGE (save for the pistons), and vice versa.
The GE has a 10.3:1 compression ratio, while the GTE has an 8.5:1 ratio. No, you need to pay an additional $1500.00 for a GTE engine or turbocharge the GE.
How much boost can a 3SGTE handle?
How much extra force can be put into the 3SGE engine? 16 psi is perfect for my 3SGTE. But with a stock motor, an HKS 2530 turbo, and a larger fuel injector and fuel pump, I doubt you’ll be able to push it much further.
How many miles does a GTE last?
The GTE’s real-world electric range is approximately 28–30 miles under a variety of driving conditions and in somewhat cold weather; in warmer weather and with more city driving (where any electric car will be at its most efficient), that number rises to roughly 35 miles.