TATA Hitachi EH 4000AC-3 Dump Truck Price in India, Specification, Features, Overview
The TATA Hitachi EH 4000 AC-3 is one of TATA Hitachi’s larger Rigid Dump Trucks with a nominal payload of over 220 tonnes. Better performance, significant reduction, and higher availability in operating and maintenance costs, all result in a lower price per tonne and a higher return on investment.
Today here in this article, I am going to introduce the TATA Hitachi EH 4000 AC-3 Dump Truck Information such that price list, engine performance, Drive axle, Transmission, Hydraulics system, steering system, Body capacity, and more, all kinds of information, are genuine and reliable. I hope it will helpful to you to buy or sell this model Dump Truck. Ok friends, So Let’s start it.
Also Read:
- TATA Hitachi EH 5000AC-3 Dump Truck
- TATA Hitachi EH 1100-5 Dump Truck
- TATA Hitachi EH 1700-3 Dump Truck
- TATA Hitachi EH 3500AC-3 Dump Truck
TATA Hitachi EH 4000AC-3 Dump Truck Main Facts
- Model Code: EH 4000AC-3
- Engine Power: 1864 KW (2500 HP)
- Max GMW: 384,000 kg
- Max Payload: 243.6 Ton
TATA Hitachi EH 4000AC-3 Dump Truck Price in India
I haven’t a genuine price so friends please contact on this Toll-Free Number and Also any other Inquiry 1800 3456 500.
TATA Hitachi EH 4000AC-3 Dump Truck Specifications
| ENGINE | |
| Model | Cummins QSKTA60-CE |
| Type | 4 Cycle Diesel w/ MCR fuel system |
| Aspiration | 1 stage Turbocharged & Low-Temperature Aftercooled |
| Emission Certification | U.S. EPA Tier 2 |
| Gross Power @1900 min-1 (rpm) SAE J1995 | 1864 kW (2 500 HP) |
| Net power @1900 min-1 (rpm) | 1771 kW (2 370 HP) |
| Maximum Torque @1 500 min-1 (rpm) SAE J1995 | 9839 N.m (1 004 kgf.m) |
| No. of Cylinders | 16 |
| Bore & Stroke | 159 x 190 mm |
| Displacement | 60 L |
| Starting | 24 Volt Electric |
| Optional: | |
| Model | MTU 16V4000 C21 |
| Type | 4 Cycle Diesel w/ DDEC |
| Aspiration | 1 stage Turbocharged & Low Temperature Aftercooled |
| Emission Certification | Not Certified |
| Gross Power @1900 min-1 (rpm) SAE J1995 | 1864 kW (2 500 HP) |
| Net power @1900 min-1 (rpm) | 1771 kW (2 370 HP) |
| Maximum Torque @1 500 min-1 (rpm) SAE J1995 | 10931 N.m (1 115 kgf.m) |
| No. of Cylinders | 16 |
| Bore & Stroke | 165 x 190 mm |
| Displacement | 65 L |
| Starting | 24 Volt Electric |
| ELECTRIC DRIVE | |
| HITACHI AC-Drive System | |
| AC Control Cabinet | |
| Rectifier | |
| Number of units | 1 |
| Rated capacity | 1680 kW |
| IGBT Inverter | |
| Number of units | 2 |
| Rated capacity per unit | 1000 kVA |
| Chopper | |
| Number of units | 2 |
| Rated capacity per unit | 1950 kW |
| Alternator | |
| Number of units | 1 |
| Capacity | 1900 kVA at 1900min-1 (rpm) |
| AC Wheel Motor | |
| Number of units | 2 |
| Capacity per unit | 765 kW |
| Grid Box (Electric Brake) | |
| Number of modules | 5 |
| Capacity per unit | 625 kW (3 min.) |
| Equipped with inverter-controlled variable speed cooling fan. | |
| Axle | |
| Planetary Ratio | 35.3 : 1 |
| Maximum Speed (Continuous) | 56 km/h |
| TIRES | |
| Front and Rear | Rim Width |
| 46/90R57 (standard) | 736.6 mm (29 in) |
| 40.00R57 | 736.6 mm (29 in) |
| ELECTRICAL SYSTEM | |
| Twenty-four-volt system. 140 ampere Cummins engine driven or 260 ampere MTU engine driven alternator. Four 245H52, 12 volt, heavy duty batteries connected in series/parallel. | |
| BODY CAPACITIES | |
| Struck (SAE) | 106 m3 |
| Heaped 3:1 | 138 m3 |
| Heaped 2:1 (SAE) | 154 m3 |
| Body capacity and payload are subject to change based on customer-specific material density and application. | |
| STEERING SYSTEM | |
| Closed-center, full-time hydrostatic power steering system using two double-acting cylinders and a variable displacement piston pump. Hitachi accumulators provide supplementary steering in accordance with ISO 5010 (SAE J1511), supplying a constant steering rate under all conditions. A tilt/telescopic steering wheel with 35 degrees of tilt and 57 mm telescopic travel is standard. | |
| Turning Diameter (ISO 7457) | 30.2 m |
| HYDRAULIC SYSTEM | |
| Body Raise Travel | 57.5 degrees |
| Body Raise Time | 18.0 sec |
| Body Down Time (Float) | 13.0 sec |
| BRAKE SYSTEM | |
| The Brake system complies with ISO 3450 (SAE J1473). | |
| Service Brake: | |
| Service braking for the EH4000AC-3 is made up of front and rear hydraulically applied brakes and the electric brake. | |
| Front Axle – Dry Disc | |
| Disc Diameter Each (2 discs/axle, 3 calipers/disc) | 121.6 cm |
| Rear Axle – Dry Disc | |
| Total Friction Area per Brake | 75760 cm2 |
| Secondary: | |
| Two of the front hydraulic, rear hydraulic, and electric brakes within the service brake system provide modulated reserve braking capability. Both front and rear hydraulic brakes are automatically applied when loss of pressure is detected. | |
| Parking Brake | |
| This system is designed to use spring-applied, hydraulically released brake calipers to hold the truck stationary | |
| Electric Brake | |
| The Electric Brake is used as a usual operating brake for the EH3500AC-3. | |
| Maximum dynamic braking (Standard). | 2 800 kW |
| Load/Dump Brake Apply | |
| Through activation of a switch by the operator, a solenoid is energized, sending full brake pressure to apply the rear Wet Disc brakes. For use during the load and dump cycles. | |
| WEIGHTS (Approximate) | |
| Net machine weight stated below includes standard equipment. Net machine weight changes will directly affect the Nominal Payload. | |
| With Standard 46/90R57 Tires | |
| Chassis with Hoist & Body parts | 137000 kg |
| Body excluding body parts | 26000 kg |
| Net Machine Weight | 163000 kg |
| The Net Machine Weight specification includes operator and 100 % fuel. | |
| Nominal Payload | 221 tonnes |
| Target GMOW | 384000 kg |
| Weight Distribution | FRONT REAR |
| Empty | 48 % 52 % |
| Loaded | 33 % 67 % |
| BODY | |
| Floor | 16 mm |
| Front | 9 mm |
| Sides | 9 mm |
| Canopy | 6 mm |
| Corners | 12 mm |
| High strength 690 N/mm2 (100 000 psi) alloy steel is also used for the canopy side members and floor stiffeners. The body is rubber cushioned on the frame. | |
| Optional Body Liners | |
| Floor & Corners | 12 mm |
| Sides & Front | 6 mm |
| Canopy drop edge | 6 mm |
| Special plate thicknesses and partial plates are available. | |
| SERVICE CAPACITIES | |
| Crankcase (includes filters): Cummins | 260 L |
| Crankcase (includes filters): MTU | 250 L |
| Engine Cooling System: Cummins | 619 L |
| Engine Cooling System: MTU | 710 L |
| Fuel Tank (Standard) | 2680 L |
| Fuel Tank (Optional) | 4620 L |
| Hydraulic system | 750 L |
| Brake cooling system | 250 L |
| Planetary Drives (L & R) | 300 L |
| Front Wheels (L & R) | 34 L |
| Windshield Washer | 20 L |
| Main Accumulator | 85 L |
Final Words
I hope you like this article, but if you have any problem regarding this article, then please comment on us. If you have any suggestions for this article, then please tell us. We will immediately apply it. Thanks for visiting our site and staying with me for more stuff like this. You can also check the Tata Hitachi Dump truck’s other mode information on our site.