Nissan VQ35HR (3.5 L) Engine: Specs and Review

Nissan VQ35HR Engine Specs

The Nissan VQ35HR is a 3.5 liter, 213.45 cu.in. 3,498 cc, natural aspirated V6 60° 4-stroke gasoline engine from Nissan VQ-family.

The engine is made at Nissan’s Iwaki Plant in Fukushima Prefecture. The Nissan VQ35HR engine was honoured by Ward’s 10 Best Engines list in 2007.

The Nissan VQ35HR engine is a redesigned version of the VQ35DE engine. The Nissan VQ35HR has a lightweight aluminium block, a fully balanced crankshaft, and four bearings. It also has two aluminium heads, two camshafts (DOHC), and four valves per Cylinder.

The Nissan VQ35HR engine has a CVTC system on the intake valves, an e-VTC system on the exhaust valves, and a Nissan Direct Ignition System (NDIS) with individual coils on each spark plug. The fastest speed is 7500 rpm.

The compression ratio rating is 10.6:1. The cylinder bore and piston stroke are 3.76 in ( 95.5 mm) and 3.20 in (81.4 mm), respectively.

It produces 297 Horsepower (221 kW) at 6,800 rpm on a version of Infiniti EX37 up to 313 Horsepower (232 kW) at 6.800 rpm.

On some hybrid vehicle models, this engine delivers up to 360 HP (268 kW), but only in combination with an electric motor. The maximum torque is 358 Nm (36.50 kg·m, 264.0 lb·ft) at 4,800 rpm.

The breakdown of the engine code is as follows:

  • VQ – Engine Family
  • 35 – 3.5 Liter Displacement
  • HR – High Response and High Revolution

Nissan VQ35HR Engine Specs

Nissan VQ35HR (3.5 L) Engine Specifications

Engine Specifications

Engine code VQ35HR
Layout Four stroke, V6
Fuel type Gasoline (petrol)
Production 2007-present
Displacement 3.5 L, 3,498 cc (213.45 cu in)
Fuel system Direct Injection
Power adder None
Power output 297 HP (221 kW, 300 PS) at 6,500 rpm
302 HP (225 kW, 306 PS) at 6,800 rpm
306 HP (228 kW, 310 PS) at 6,800 rpm
311 HP (232 kW, 315 PS) at 6,800 rpm
Torque output 343 Nm (34.9 kg·m, 252.9 lb·ft) at 4,800 rpm
350 Nm (35.7 kg·m, 258.1 lb·ft) at 5,000 rpm
355 Nm (36.2 kg·m, 216.8 lb·ft) at 4,800 rpm
358 Nm (36.5 kg·m, 264.0 lb·ft) at 4,800 rpm
Firing order 1-2-3-4-5-6
Dimensions (L x W x H):
Weight

Cylinder head

Blockhead alloy Aluminium
Valve Arrangement: DOHC, chain drive
Cylinder head height: 126.3-126.5 mm (4.97-4.98 in)
Valves: 24 (4 valves per cylinder)
Intake valve timing
(Intake valve timing control-OFF):
248°
Exhaust valve timing: 248°
Valve head diameter: INTAKE 36.6-36.9 mm (1.441-1.453 in)
EXHAUST 30.2-30.5 mm (1.189-1.201 in)
Valve length: INTAKE 97.13 mm (3.8240 in)
EXHAUST 94.67 mm (3.7272 in)
Valve stem diameter: INTAKE 5.965-5.980 mm (0.2348-0.2354 in)
EXHAUST 5.962-5.970 mm (0.2347-0.2350 in)
Valve spring free length: INTAKE 43.85 mm (1.7264 in)
EXHAUST 43.85 mm (1.7264 in)
Camshaft cam height: INTAKE 45.865-46.055 mm (1.8057-1.8132 in)
EXHAUST 45.875-46.065 mm (1.8061-1.8136 in)
Exhaust camshaft journal diameter: №1 25.935-25.955 mm (1.0211-1.0218 in)
№2, 3, 4, 5 23.445-23.465 mm (0.9230-0.9238 in)

Head tightening procedure and torque specs:

  • Step 1: 105 Nm; 11.0 kg·m; 77 ft·lb
  • Step 2: Loosen all bolts completely
  • Step 3: 40.0 kg·m; 4.1 kg·m; 30 ft·lb
  • Step 4: Turn all bolts 95°
  • Step 5: Turn all bolts another 95°

Camshaft sprocket bolts

  • 103 Nm; 11.0 kg·m; 76 ft·lb

Cylinder block

Cylinder block alloy Aluminium
Compression ratio: 10.6:1
Cylinder bore: 95.5 mm (3.760 in)
Piston stroke: 81.4 mm (3.205 in)
Number of piston rings (compression / oil): 2 / 1
Number of main bearings: 4
Cylinder inner diameter (standard): 95.500-95.510 mm (3.7598-3.7602 in)
Piston skirt diameter (standard): 95.480-95.490 mm (3.7590-3.7594 in)
Piston pin outer diameter: 21.989-21.995 mm (0.8657-0.8659 in)
Piston ring side clearance: Top 0.040-0.080 mm (0.0016-0.0031 in)
Second 0.030-0.070 mm (0.0012-0.0028 in)
Oil 0.055-0.155 mm (0.0022-0.0061 in)
Piston ring end gap: Top 0.23-0.33 mm (0.0091-0.0130 in)
Second 0.23-0.33 mm (0.0091-0.0130 in)
Oil 0.17-0.47 mm (0.0067-0.0185 in)
Connecting rod bushing inner diameter: 22.000-22.006 mm (0.8661-0.8664 in)
Connecting rod big end diameter: 57.000 mm (2.2441 in)
Connecting rod center distance: 144.15-144.25 mm (5.68-5.68 in)
Crankshaft main journal diameter: 64.975 mm (2.5581 in)
Crankpin diameter: 53.974 mm (2.1250 in)
Crankshaft center distance: 40.66-40.74 mm (1.6008-1.6039 in)

Maintenance Data

Valve clearance (HOT)
Intake valve 0.304-0.416 mm (0.012-0.016 in)
Exhaust valve 0.308-0.432 mm (0.012-0.017 in)
Compression pressure
Standard 13.0 kg/cm2 (185 psi) / 300 rpm
Minimun 10.0 kg/cm2 (142 psi) / 300 rpm
Compression differential limit between cylinders 1.0 kg/cm2 (15 psi) / 300 rpm
Oil system
Oil consumption , L/1000 km (qt. per miles) up to 0.5 (1 qt. per 1200 miles)
Recommended engine oil 5W-30
Oil type API
Engine oil capacity (Refill capacity) With filter change 4.9 l (5-1/8 US. qt., 4-3/8 Imp. qt.)
Without filter change 4.6 l (4-7/8 Us. qt., 4 Imp. qt.)
Oil change interval, km (miles) 5,000-10,000 (3,000-6,000)
Oil Pressure, kPa (kg/cm 2, psi) Idle speed: More than 98 (1.0, 14)
2,000 rpm: More than 294 (3.0, 43)
Ignition system
Spark plug DENSO: FXE24HR11
Spark plug gap 1.1 mm (0.043 in)

Valve clearance adjustment data

Calculate the thickness of the new adjusting valve lifter so valve clearance comes within specified values.

R = Thickness of removed valve lifter
N = Thickness of new valve lifter
M = Measured valve clearance

Intake:
N = R + [M – 0.30 mm (0.012 in)]
Exhaust:
N = R + [M – 0.34 mm (0.013 in)]

Valve lifters are available in 27 sizes ranging from 7.88 mm (0.3102 in) to 8.40 mm (0.3307 in), in steps of 0.02 mm (0.0008 in).

Example (exhaust valve):
R = 7.90 mm
M = 0.52 mm
N = 7.90 + (0.52 – 0.34) = 8.08 mm, so we require a valve lifter with identification mark 808P.

  Cold Hot
Intake 0.26-0.34 mm (0.010-0.013 in) 0.304-0.416 mm (0.012-0.016 in)
Exhaust 0.29-0.37 mm (0.011-0.015 in) 0.308-0.432 mm (0.012-0.017 in)

Vehicle Applications

Model Years Produced
Infiniti G35 Sedan 2007–2008
Nissan Skyline V36 350GT Sedan 2007–2008
Nissan 350Z 2007–2008
Nissan Fuga 350 GT 2006–2008
Infiniti EX35 2008–2012
Infiniti FX35 2009–2012
Infiniti M35 2009–2010
Infiniti M35h 2011–2013
Infiniti M35h 2011–2013
Infiniti M35h 2011–2013
Nissan Fuga Hybrid 2010–
Nissan Cima 2012–
Mitsubishi Dignity 2012–
Infiniti Q50 Hybrid 2014–
Infiniti Q70 Hybrid 2014–

Also Check:

  • Kubota D905 Engine Specs 
  • Toyota 1FZ-FE Engine Specs
  • Kubota D1105 Engine Specs
  • Suzuki J20 Engine Specs
  • Allis Chalmers Engine Specs
  • Allis Chalmers B Engine Specs
  • Kubota V2203 Engine specs
  • Nissan L28ET Engine Specs
  • Toyota 1JZ-GTE Engine Specs
  • Datsun 100A Engine Specs

Final Words

This concludes our discussion of the Nissan VQ35HR (3.5 L) engine specs and review; however, if you have any questions regarding this article, please submit them in the comment section below. We will do our best to respond to you as soon as possible.

Leave a Comment