Kawasaki FB460V Engine Specs
The Kawasaki FB460V is a 0.46 l (28.1 cu-in,460 cc) air-cooled single-cylinder four-stroke internal combustion small gasoline (petrol) engine with a vertical shaft by Kawasaki Heavy Industries Ltd. for general-purpose use.
The FB460V engine has an L-shaped head with two valves, a transistorized flywheel magneto ignition system, a float-type carburetor with a fixed main jet, and a mechanical governor.
The engine had a pressurized lubrication system, a semi-cyclone air cleaner with two elements, and an electric or recoil starter. Model engines with an electric starter also have a 12V-13A charging coil with a regulator.
The piston stroke is 74.0 mm (2.91 in), and the piston bore is 89.0 mm (3.5 in). The compression ratio is 6.4:1. At 3,600 rpm, the Kawasaki FB460V motor produces 12.5 HP; at 2,300 rpm, it makes 28.0 Nm (2.8 kgm, 20.1 ftlb).
Kawasaki FB460V: 460 cc (12.5 HP) Vertical Shaft Engine Specifications
Engine Specifications
| Model | FB460V |
| Type | 4-stroke, L-head, single cylinder |
| Displacement | 460 cm 3 (28.1 cu-in) |
| Max. horsepower | 12.5 HP at 3,600 rpm |
| Max. torque | 28.0 Nm (2.8 kg·m, 20.1 ft·lb) at 2,300 rpm |
| Carburetor | Float type |
| Cooling system | Forced-air |
| Ignition system | Transistorized magneto ignition |
| Lubricating system | Pressure and splash |
| Starting system | Recoil or electric starter |
| Stoping system | Ignition primary circuit ground |
| Fuel used | Unleaded gasoline (octane number 86 or higher) |
| Fuel tank capacity | – |
| Fuel consumption | 313 g/kWh (230 g/HPh, 0.51 lb/HPh) |
| PTO shaft rotation | Counterclockwise (from PTO shaft side) |
Maintenance Data
| Engine | |
| Maximum speed | 3300 ± 150 rpm |
| Idle speed | 1400 ± 150 rpm |
| Cylinder compression | not be less then 3.0 kg/cm2 (43 psi) at 600 rpm |
| Valve tappet clearance (Cold) | |
| Intake valve | 0.10-0.16 mm (0.004-0.006 in) |
| Exhaust valve | 0.10-0.16 mm (0.004-0.006 in) |
| Carburetor | |
| Model | FB460D-AS |
| Main jet | #112.5 |
| Pilot jet | #47.5 |
| Float valve | 1.5 mm (0.06 in) |
| Pilot screw | 1-1/8 turns out |
| Model | FB460D-BS |
| Main jet | #115 |
| Pilot jet | #47.5 |
| Float valve | 1.5 mm (0.06 in) |
| Pilot screw | 1-1/8 turns out |
| Oil system | |
| Oil type | 4-stroke or an equivalent (SD, SE, SE/CC, SF) |
| Recommended oil | SAE 5W-20 |
| Oil capacity | 1.4 L (2.96 US pt.) |
| Ignition system | |
| Spark plug | NGK: BMR-4A CHAMPION: RCJ-8 |
| Spark plug gap | 0.6-0.7 mm (0.024-0.028 in) |
| Tightening torque | 28 Nm; 2.8 kg·m; 20.6 ft·lb |
Tightening torque specs
| Connecting rod cap | 19-20 Nm; 1.9-2.0 kg·m; 14-15 ft·lb |
| Cylinder head | 34-39 Nm; 3.4-3.9 kg·m; 25-29 ft·lb |
| Flywheel nut | 83-88 Nm; 8.3-8.8 kg·m; 62-65 ft·lb |
| Spark plug | 28 Nm; 2.8 kg·m; 20.6 ft·lb |
Dimensions and Weight
| Electric starter | Recoil starter | |
| Length | 419 mm (16.50 in) | 511 mm (20.12 in) |
| Width | 381 mm (15.0 in) | 365 mm (14.37 in) |
| Height | 307 mm (12.08 in) | 356 mm (14.0 in) |
| Dry weight | 36.0 kg (79.4 lbs) | 36.0 kg (79.4 lbs) |
Also Check:
- Kubota D905 Engine Specs
- Toyota 1FZ-FE Engine Specs
- Kubota D1105 Engine Specs
- Suzuki J20 Engine Specs
- Allis Chalmers Engine Specs
- Allis Chalmers B Engine Specs
- Kubota V2203 Engine specs
- Nissan L28ET Engine Specs
- Toyota 1JZ-GTE Engine Specs
- Datsun 100A Engine Specs
Final Words
This concludes our discussion of the Kawasaki FB460V 460 cc (12.5 HP) Vertical Shaft Engine specs and review; however, if you have any questions regarding this article, please submit them in the comment section below. We will do our best to respond to you as soon as possible.