John Deere 4850 Specs: The John Deere 4850 is a 4-wheel drive row-crop tractor, that was manufactured from 1984 to 1988. It is powered by a 6.8L 6-cylinder engine that produces 175 horsepower. The 4850 has a 102-gallon fuel tank and an 18.6-gallon hydraulic tank. It Weighs 18,000 pounds.
The Price of a used John Deere 4850 can vary depending on the condition of the tractor and the options that it is equipped with but is generally around $22,000.
Here are the key Specs, price, weight, Horsepower, and details about the John Deere 4850:
John Deere 4850 Specs
| Production | |
| Manufacturer | John Deere |
| Row-Crop tractor | |
| Built in Waterloo, Iowa, USA | |
| Original price | $70,800 (1983 2WD ) |
| $81,605 (1983 4WD ) | |
| John Deere 4850 Serial Numbers | |
| 1983 | 1000 |
| 1984 | 5001 |
| 1985 | 8001 |
| 1986 | 10001 |
| 1987 | 11001 |
| 1988 | 12001 |
| 1989 | 14501 |
| John Deere 4850 Engine Detail | |
| John Deere | |
| intercooled turbocharged diesel | |
| 6-cylinder | |
| liquid-cooled | |
| Displacement | 466 ci 7.6 L |
| Bore/Stroke | 4.56×4.75 inches 116 x 121 mm |
| Power | 207.9 hp 155.0 kW |
| Air cleaner | dry |
| Compression | 15:1 |
| Rated RPM | 2200 |
| Firing order | 1-5-3-6-2-4 |
| Starter volts | 12 |
| Oil capacity | 21 qts 19.9 L |
| Coolant capacity | 32 qts 30.3 L |
| John Deere 4850 Transmission | |
| Transmission | John Deere Power Shift |
| Type | full power shift |
| Gears | 15 forward and 4 reverse |
| Clutch | Perma-Clutch wet disc |
| Oil capacity | 74.4 qts (2WD) 70.4 L |
| 86.4 qts (4WD) 81.8 L | |
Check here: John Deere 6195R
| John Deere 4850 Power | |
| Engine | 207.9 hp 155.0 kW |
| Drawbar (claimed) | 162 hp 120.8 kW |
| PTO (claimed) | 190 hp 141.7 kW |
| Drawbar (tested) | 164.73 hp 122.8 kW |
| PTO (tested) | 192.99 hp 143.9 kW |
| John Deere 4850 Mechanical | |
| Two- or four-wheel drive | |
| Final drives | inboard planetary |
| Differential lock | hydraulic rear |
| Power steering | |
| Hydraulic wet disc brakes | |
| Sound-Gard cab standard. Optional four-post Roll-Gard ROPS. | |
| John Deere 4850 Capacity | |
| Fuel | 102 gal 386.1 L |
| Hydraulic system | 18.6 gal (2WD) 70.4 L |
| 21.6 gal (4WD) 81.8 L | |
| John Deere 4850 Hydraulics | |
| Type | closed center |
| Capacity | 18.6 gal (2WD) 70.4 L |
| 21.6 gal (4WD) 81.8 L | |
| Pressure | 2277 psi 157.0 bar |
| Valves | 2 or 3 |
| Pump flow | 29.5 gpm 111.7 lpm |
Check here: John Deere 6M
| John Deere 4850 Tractor hitch | |
| Rear Type | III |
| Control | lower-link draft sensing |
| Rear lift | 9,599 lbs 4354 kg |
| John Deere 4850 Power Take-off (PTO) | |
| Rear PTO | independent |
| Clutch | hydraulic wet disc |
| Rear RPM | 1000 |
| Engine RPM | 1000@2200 |
| John Deere 4850 Dimensions & Tires | |
| 2WD Wheelbase | 118.5 inches 300 cm |
| 4WD Wheelbase | 117.1 inches 297 cm |
| Weight | 17457 to 18720 pounds |
| Front tire | 11.00-16 |
| 2WD Rear tire | 20.8-38 |
| John Deere 4850 Electrical | |
| Ground | negative |
| Charging system | alternator |
| Charging amps | 90 |
| Batteries | 2 |
| Battery volts | 6 |
| 12 Opt | |
| John Deere 4850 Tires | |
| 2WD Standard tires (ag) | Front: 11.00-16. Rear: 20.8-38 |
| 4WD Standard tires (ag) | Front: 18.4-26. Rear: 20.8-38 |
| Ag rear | 18.4-38 |
| 18.4R38 | |
| 20.8R38 | |
| 18.4-42 | |
| 18.4R42 | |
| John Deere 4850 Dimensions | |
| 2WD Wheelbase | 118.5 inches 300 cm |
| 4WD Wheelbase | 117.1 inches 297 cm |
| Length | 179.7 inches (2WD) 456 cm |
| 184.8 inches (4WD) 469 cm | |
| Width | 118 inches (standard axle) 299 cm |
| 85 inches (optional axle) 215 cm | |
| 108 inches (optional axle) 274 cm | |
| Height | 117.8 inches 299 cm |
| Shipping weight | 17,457 lbs 7918 kg |
| Operating weight | 18,720 lbs (2WD) 8491 kg |
| Ground clearance | 14.92 inches 37 cm |
| Rack-and-pinion rear axle | 3.94 by 96 inches 100 by 2438 mm |
| Rack-and-pinion rear axle | 3.94 by 108 inches 100 by 2743 mm |
| Rack-and-pinion rear axle | 3.94 by 118 inches 100 by 2997 mm |
John Deere 4850 Loader Attachments
| Attachment | Use |
|---|---|
| Header | Harvesting crops |
| Conditioner | Improving the drying rate of the crop |
| Elevator | Moving the crop from the header to the auger |
| Auger | Moving the crop from the elevator to the hopper |
| Hopper | Storing the harvested crop |
| Unloader | Unloading the harvested crop from the hopper |