Hyundai KIA G6BA 2.7L Engine Specs, Problems & Reliability

Hyundai KIA G6BA 2.7L Engine

Here in this post, I have gathered information about the Hyundai KIA G6BA 2.7L Engine from its official website, including its specifications, Problems, and Reliability.

We believe in providing reliable information to our readers, therefore we prefer to obtain information on the Hyundai KIA G6BA 2.7L Engine from authentic sources.

This article, which has been updated, has all the information you require about the Hyundai KIA G6BA 2.7L Engine.

Hyundai KIA G6BA 2.7L Engine

From 1999 through 2012, a Korean company built the 2.7-litre V6 Hyundai G6BA engine, which was used in the luxury trims of the Sonata, Magentis, Santa Fe, and Tucson.

This power plant also came in a gas-powered variant, designated L6BA.

To replace the G6AV engine, which was a 24-valve copy of the 2.5-litre Mitsubishi 6G73, Hyundai introduced its own V6 unit in 1999.

There are some important differences, such as an aluminium cylinder block with a cooling jacket and intake camshafts that are turned by a belt while the exhaust camshafts are connected to them by a chain. 

Production years 1999-2012
Displacement, cc 2656
Fuel system distributed injection
Power output, hp 165 – 182
Torque output, Nm 230 – 250
Cylinder block aluminium V6
Blockhead aluminium 24v
Cylinder bore, mm 86.7
Piston stroke, mm 75
Compression ratio 10.0
Features VIS, DOHC
Hydraulic lifters yes
Timing drive chain & belt
Turbocharging no
Recommended engine oil 5W-30, 5W-40
Engine oil capacity, litre 5.5
Fuel type 92
Euro standards EURO 3/4
Fuel consumption, L/100 km (for Hyundai Tucson 2007)
— City
— highway
— combined
13.2
8.2
9.9
Engine lifespan, km ~400 000
Weight, kg 148 (185 with attachments)

Hyundai KIA G6BA 2.7L Engine Problems & Reliability

The swirl flaps of the geometry change system are in the intake manifold, and their bolts tend to come loose and fall right into the engine combustion chamber.

This is the only weak point of an otherwise reliable and plentiful power unit.

A thick timing belt on this engine can go the distance beyond the 60,000 kilometres that are recommended, but it is frequently ruined by a not-so-reliable hydraulic tensioner or oiling due to a leak.

If the belt skips, the engine won’t start, and if it breaks, the valves will be bent.

The oil burner is another common gripe of those whose vehicles have such engines.

Around the 200-thousand-kilometre mark, you may notice a slight but steadily increasing lubricant use.

In most cases, the problem is due to a hardened valve stem seal or a stuck ring.

The hydraulic lifters, crankshaft pulley, sensors, and high-voltage wiring are all potential areas of failure in the unit.

Also, the throttle, idle speed controller, or injectors could be dirty, which would make the engine speed change all the time. 

Hyundai KIA G6BA 2.7L Engine Review 

Hyundai-Kia G6BA is a 60deg gasoline engine introduced in 2001. The engine is used in a wide range of Hyundai and Kia models, including the Santa Fe and Tucson. For a full review, please check this YouTube video Here.

Hyundai KIA G6BA 2.7L Engine FAQ

Who makes Hyundai engines?

Where can I find Hyundai’s engine manufacturer? Engines for both Hyundai and Kia vehicles are manufactured by the companies themselves.

On the other hand, there is some overlap between the two businesses. Kappa G3LA/G3LC and Kappa G4LD engines, for instance, are utilized in Hyundai and Kia vehicles.

Is a 2.7-litre engine a 4 or 6-cylinder?

The cutting-edge powertrain developed specifically for light-duty pickups is the new 2.7-litre turbocharged inline four-cylinder engine.

New for 2022 are the GMC Sierra 1500 base and SLE trims and the Chevrolet Silverado 1500 Custom, LT, and RST.

Is the 2.7 L motor good?

The 2.7 is ideal for everyday driving. You won’t believe it, but it has 430 lb.ft. of torque. For an engine of its size, that’s an impressively high level of torque.

Is a 2.7 L turbo engine good?

The new 2.7L High-Output engine is a great option for any truck driver because it generates 430 lb-ft of torque, approximately 50 lb-ft more than the 5.3L V8.

The 2.7L High-Output engine not only rivals the power of the 5.3L V8 in the Chevy but also has impressive towing and payload capacities.

Are 2.7 turbo engines reliable?

The Chevy Silverado and GMC Sierra both feature the 2.7-litre engine.

Although there isn’t much of a difference between the two trucks, many truck owners have complained about how unreliable the engine is.

Since then, they have either had to replace the complete engine or fix the faulty cylinder heads.

Leave a Comment