Husqvarna 572XP Specs ,Review & Prices

• On Amazon here – has product in stock most of the time
• Here at Acme Tools – Husky makes a wide range of chainsaws.
• Tractor Supply Co here –but may not be able to be delivered
• On eBay here – for parts and both new and used 572XP

Power output

5.8 hp

Cylinder displacement

4.3 cu. inch

Maximum power speed

9,900 rpm

Idling speed

2,700 rpm

Torque, max.

4.5 Nm

Torque, max. at rpm

8,200 rpm

Clutch engagement speed (±120)

3,700 rpm

Fuel consumption

429 g/kWh

Fuel consumption

3.88 lbs/h

Spark plug

NGK BPMR7A

Electrode gap

0.02 in

Ignition module air gap

0.01 in

Oil pump type

Adjustable flow, no flow at idle

Emission

Exhaust emissions (CO2 EU V)

841 g/kWh

Equipment

Bar length (inch)

32 in

Recommended bar length, min

15 in

Recommended bar length, max

28 in

Chain type

H83

Gauge

.063″

Pitch

3/8″

Sprocket type

Rim 7

Weight (excl. cutting equipment)

14.5 lbs

Lubricant type

Husqvarna 2 stroke or equiv. at 50:1

Oil tank volume

0.7 US pint

Oil tank volume

0.35 l

Sound power level, guaranteed (LWA)

120 dB(A)

Sound power level, measured

118 dB(A)

Sound pressure level at operators ear

107 dB(A)

Equivalent vibration level (ahv, eq) front handle

5 m/s²

Equivalent vibration level (ahv, eq) rear handle

4.1 m/s²

✅ X-Torq

The strong and efficient X-Torq(r) engine cuts down on both fuel use and pollution. This will make your place of work better and save you money at the gas station.

✅ Smart Start

The engine and starter were made so that the machine could be started quickly and easily.

✅ Magnesium crankcase

The crankcase is made to be strong enough to handle high RPMs and professional use. It will always be there.

✅ Higher cutting capacity

The new design of the engine gives it a wide range of RPMs so that it can work at its best even when carrying a heavy load.

The saw can cut through 12% more wood than similar models with the same cc. Even with long guide bars, this makes it a great tool for getting work done quickly.

✅ Excellent cooling capacity for a longer engine life

The new cooling system was made to make a chainsaw that works well and can be used in many different situations.

✅ Equipped with a state-of-the-art filtration system

A heavy-duty filter is built into the chainsaw. This filter works better and lasts longer. It has a bigger area for filtering than models that came before.

This keeps the engine clean and makes it work better for long hours.

✅ 10 times quicker air/fuel mix adjustment

AutoTune(TM) makes sure that the engine is set up correctly and makes sure that the engine works well in all conditions.

✅ Flip-up tank caps

Even with thick winter gloves on, flip-up fuel tank caps can be opened and closed securely.

✅ Low vibrations

The anti-vibration system on a Husqvarna keeps your hands and fingers from being affected by vibrations from the engine or the cutting tools.

This is not only to keep your body safe, but also to keep your hands and arms from getting tired. It will also help you get more done during the day at work.

✅ Optimal chip ejection avoids clogging

When cutting long wood fibres, this special clutch cover keeps the blade from getting stuck.

✅ Soft cut-out system

This clever engine control system is made to make the engine last longer. This system keeps an eye on the engine and keeps it from revving too fast.

✅ Better maneuverability gives full control

If the front handlebar is close to the centre of gravity, you will be able to control the cutting better.

✅ Felling sight to last a lifetime

You can only use a chainsaw as well as you can see. So that you can see clearly, we made a permanent mould in our chainsaw.

✅ Rubber handle inlay for a safer grip

Rubber handles are easy to hold but still give you room to move while you work.

✅ Visible fuel level

A clear fuel indicator makes it easy to see how much gas is in the tank.

✅ AutoTune

AutoTune automatically adjusts the engine settings to get the best performance out of the engine.

No time was spent making changes to the carburetor.

It makes up for things like different fuels, altitude, humidity, temperature, and an air filter that is clogged up.

✅ Air Injection filters 98% of incoming dust

The chainsaw’s Air InjectionTM feature filters out 98% of the sawdust, grit, and dirt that comes in.

This means that the air filter doesn’t need to be cleaned as often and the chainsaw always works well.

✅ Powerful & Efficient Engine

The engine in the 572xp has just under 6 horsepower. That’s more than enough for most chainsaw jobs and gives you the power to cut down even the biggest trees.

Add to that the fact that the 572xp has Husqvarna’s X-Torq technology, and you have quite a package. The X-Torq design not only makes cars use less gas, but it also helps cut emissions by a lot.

✅ Cutting Reach & Power

The second best thing about this chainsaw is how far it can reach and how well it cuts in general.

The standard length of the cutting bar is 28 inches, which is right at the top of what Husqvarna makes and again helps with those huge jobs.

The chainsaw is smart because it can also be used with a much shorter cutting arm of about 15 inches if that is what is needed.

This makes it one of the most powerful and versatile chainsaws that Husqvarna makes.

✅ Upgraded Cooling & Filtration Systems

Even though these parts of the design don’t get as much attention as the engine and cutting arm, they are just as impressive in many ways.

For example, a large chainsaw can only keep running for a long time if the cooling system has been redesigned.

In the same way, the improved air filtration stops harmful buildups that could block the air intake and damage the tool.

✅ AutoTune

The AutoTune technology from Husqvarna is another great new idea. It works by figuring out the best settings for the carburetor based on the working conditions and temperatures.

This is done as you work. So, the user doesn’t have to do anything, which makes the tool run much more smoothly.

☑️ How much does a Husqvarna 572XP weigh?

14.5 lbs
Product details. Experts in forestry and tree care made the Husqvarna 572 XP® so that it can do hard work. It has been tested in the harshest places on earth.

Compared to earlier Husqvarna models in its class, the 572 XP® has a better power-to-weight ratio and can cut through 12 percent more wood.

☑️ How much horsepower is a Husqvarna 572xp?

It has the best ratio of power to weight of any Husqvarna model in its class, with 5.8 horsepower and 4.5 Nm of torque.

☑️ How do you start a Husqvarna 572xp?

It’s easy to start up this chainsaw. First, hold the handle with your left hand and put the unit between your thighs and behind your right knee.

Then, hold the machine firmly and pull the starter cord.

The manufacturer’s “easy start” technology should make the engine work right away, but if it doesn’t, keep pulling the cord until it does.

☑️ How much horsepower does a Husqvarna 572xp have?

The engine in the 572xp has just under 6 horsepower. That’s more than enough for most chainsaw jobs and gives you the power to cut down even the biggest trees.

☑️ How long is the Husqvarna chainsaw cutting bar?

The second best thing about this chainsaw is how far it can reach and how well it cuts in general.

As a standard, the cutting bar is 28 inches long, which is right at the top of what Husqvarna makes and helps with those huge jobs. The smart part is that.

☑️ What is the longest cutting bar on a Husqvarna chainsaw?

As a piece of professional equipment, you would expect it to be able to cut well.

The 572xp does a good job thanks to its powerful and efficient engine and 28″ cutting bar. This is the bar with the longest cut.

☑️ Does Husqvarna have a cooling system?

The cooling system has also been made better by Husqvarna. They have improved this system to make it more reliable and make the engine last longer.

☑️ Does the Husqvarna 572 XP have a filter?

The 572 XP now comes with a large surface heavy-duty filter as a standard feature.

You get better and longer filtration and this improvement make the engine healthier so it can work for longer hours.

The Husqvarna 572 XP also has the company’s AutoTune technology, which makes sure that the engine is set up correctly.