Farmall H Specs, Price, Weight, Serial Numbers, Attachments Info

Farmall H Specs – The Farmall H is a medium-sized two-plow row crop tractor produced by International Harvester under the Farmall brand from 1939 to 1954.

Farmall H tractor was the most widely grown of International Harvester’s “letter series,” with around 390,000 units built over the 14-year run.

The Farmall H tractor had a 2.5L 4-cylinder engine and a 5-speed sliding gear transmission. In reverse, it could achieve a speed of 16.3 miles per hour (26.2 km/h) forward and 2.7 miles per hour (4.3 km/h).

Scroll down to learn more about the Farmall H Specs, price, History, Serial Numbers, Weight, Horsepower, Attachments, and other details. 

Farmall H Specs, Price, Weight, Serial Numbers, Attachments Info

Farmall H Price

The original price was $2,000 in 1953

Farmall H History

Manufacturer Farmall (a part of International Harvester)
Row-Crop tractor
Built in Rock Island, Illinois, USA
Total built 391,227
The Farmall H is the row-crop version of the McCormick-Deering W-4.

Farmall H Variants

H row-crop
HV high-crop
W-4 standard tread
I-4 industrial
O-4 orchard

Farmall H Serial Numbers

1939 501
1940 10653
1941 52387
1942 93237
1943 122091
1944 150251
1945 186123
1946 214820
1947 241143
1948 268991
1949 300876
1950 327975
1951 351923
1952 375861
1953 390500

Farmall H Specs

Gasoline Engine Detail

International Harvester C-152
gasoline
4-cylinder
liquid-cooled
Displacement 152.1 ci
2.5 L
Bore/Stroke 3.375×4.25 inches
86 x 108 mm
Compression 5.9:1
Rated RPM 1650
Firing order 1-3-4-2
Starter hand-crank
  electric Opt
Starter volts 6
Farmall H Oil capacity 6 qts
5.7 L
Coolant capacity 16.5 qts
15.6 L
Sparkplug gap 0.025 inches
0.635 mm
Point gap 0.013 inches
0.330 mm
Intake valve clearance 0.017 inches*
0.432 mm
Exhaust valve clearance 0.017 inches*
0.432 mm

Distillate Engine Detail

International Harvester
distillate
4-cylinder
liquid-cooled vertical I-head
Displacement 152.1 ci
2.5 L
Bore/Stroke 3.375×4.25 inches
86 x 108 mm
Compression 4.75:1
Firing order 1-3-4-2
Farmall H Oil capacity 6 qts
5.7 L
Coolant capacity 16.5 qts
15.6 L

kerosene Engine Detail

International Harvester
kerosene
4-cylinder
liquid-cooled
Displacement 152.1 ci
2.5 L
Bore/Stroke 3.375×4.25 inches
86 x 108 mm
Compression 4.5:1
Firing order 1-3-4-2
Farmall H Oil capacity 6 qts
5.7 L
Coolant capacity 16.5 qts
15.6 L

Transmission

Type sliding gear
Gears 5 forward and 1 reverse
Clutch dry disc
Farmall H Oil capacity 24 qts
22.7 L

Farmall H Power

Drawbar (claimed) 19 hp
14.2 kW
Belt (claimed) 24 hp
17.9 kW
Drawbar (tested) 24.17 hp
18.0 kW
Belt (tested) 26.20 hp
19.5 kW

Mechanical

Two-wheel drive
Manual steering
Mechanical contracting band brakes
Open operator station.

Capacity

Fuel 17.5 gal
66.2 L
Aux. fuel 0.875 gal
3.3 L
Hydraulic system 1 gal
3.8 L

Tractor hitch

Type Lift-All *

Electrical

Ground positive
Charging system generator
Battery volts 6

Power Take-off (PTO)

Rear RPM 540 *

Hydraulics

Capacity 1 gal
3.8 L

Farmall H Tires

Ag front 5.50-16
  6-16
Ag rear 51×6 (steel)
  6.00-36
  8-38
  9-38
  10-38
Ag front 6×20 (HV)

Dimensions

Wheelbase 88.325 inches
224 cm
Length 125.25 inches
318 cm
Width 75.5 inches
191 cm
  100 inches (long-axle)
254 cm
Height (steering wheel) 74 inches
187 cm
Farmall H Weight 3875 lbs
1757 kg
Front tread 8.1 inches
20 cm
Rear tread 44 to 80 inches
111 to 203 cm

Farmall H Attachments

Parameter Imperial Metric
Breakout 5000 lbs 2268 kg
Breakout 1500 lbs 680 kg
Height (at pin) 96 inches 243 cm
Boom cyl 3.0 inches 7 cm
Weight 1270 lbs 576 kg
Bucket width 43.5 inches 110 cm

Leave a Comment