Are you looking to buy Allis Chalmers 6060 Specs? But you need to know more about Allis Chalmers 6060 Specs Specifications, Weight, Price, and Review. In this post, you can find out more.
On the internet, it’s very hard to find accurate and detailed information aboutAllis Chalmers 6060 Specs, Weight, Price, and Reviews.
So, our team went to several Allis Chalmers 6060 Specs showrooms, got all the information, and put it all together in a way that is easy to read and understand.
Let’s look at the latest specs, weight, price, and review of the Allis Chalmers 6060 Specs.
Allis Chalmers 6060 Overview
The Allis Chalmers 6060 farm tractor model was created. More than 4,027 of this specific type, which cost 21,460 USD from 1980 to 1984 in the United States and had a Four-post ROPS canopy cabin, were produced.
Speaking of size and weight, this model has a 6,100 lb (2766 kg) weight, measuring 68.5 inches (173 cm) in width, 146.5 inches (3722 cm) in length, and 103.2 inches (2622 cm) in height. It also has a 93-inch (236 cm) wheelbase and an 18.1-inch (45 cm) ground clearance (4WD front axle).
Ag tyres 7.50-16 (2WD) front and 7.50-16 (2WD) back can fit on this tractor.
This Allis Chalmers 6060 has a 200 ci (3.3 L) 4-cylinder diesel engine. The fuel tank has a 32 gal (121.1 L) capacity.
This machine has an 8 forward and 2 reverse transmission system, with a 4×2 2WD wheel drive system.
Allis Chalmers 6060 Price & Weight
Price: $21,460
Weighs: 6100 to 6465 pounds
Allis Chalmers 6060 Specifications
Allis Chalmers 6060 Serial Numbers
| Location: | Right side of engine adapter flange |
| 1980: | 1001 |
| 1981: | 1297 |
| 1982: | 2463 |
| 1983: | 3894 |
| 1984: | 4572 |
| Final: | 5027 |
Allis Chalmers 6060 Production
| Manufacturer: | Allis Chalmers |
| Type: | Row-Crop tractor |
| Factory: | West Allis, Wisconsin, USA |
| Total buil | 4,027 |
| Original price: | $21,460 |
Allis Chalmers 6060 Power
| Power at rated engine speed: | 63.83 hp 47.6 kW |
| Fuel use: | 4.0 gal/hour 15.1 l/hour |
| Power at rated PTO speed: | 64.90 hp 48.4 kW |
| Fuel use: | 4.0 gal/hour 15.1 l/hour |
| Max power: | 50.87 hp 37.9 kW |
| Fuel use: | 3.8 gal/hour 14.4 l/hour |
| Max pull: | 6,846 lbs 3105 kg |
Allis Chalmers 6060 Engine Detail
| Displacement: | 200 ci 3.3 L |
| Bore/Stroke: | 3.876×4.250 inches 98 x 108 mm |
| Air cleaner: | paper element with pre-cleander |
| Compression: | 14.1:1 |
| Rated RPM: | 2300 |
| Starter volts: | 12 |
| Oil capacity: | 10 qts 9.5 L |
| Coolant capacity: | 17 qts 16.1 L |
Allis Chalmers 6060 Mechanical
| Chassis: | 4×2 2WD |
| 4×4 MFWD 4WD (optional) | |
| Steering: | hydrostatic power |
| Brakes: | differential hydraulic wet disc |
| Cab: | Four-post ROPS canopy. Cab and air-conditioning optional. |
| Transmission: | 8-speed partially synchronized |
Allis Chalmers 6060 Capacity
| Fuel: | 32 gal 121.1 L |
| Rear diff.: | 37 qts 35.0 L |
Allis Chalmers 6060 Hydraulics
| Type: | open center |
| Valves: | 2 |
| Pump flow: | 11.4 gpm 43.1 lpm |
| Total flow: | 19 gpm 71.9 lpm |
Allis Chalmers 6060 Tractor hitch
| Rear Type: | II |
| Rear lift (at 24″/610mm): | 3,500 lbs 1587 kg |
Allis Chalmers 6060 Power Take-off (PTO)
| Rear PTO: | independent |
| Rear RPM: | 540 |
Allis Chalmers 6060 Tires
| Ag front: | 7.50-16 (2WD) |
| 11.2-24 (4WD) | |
| Ag rear: | 16.9-28 (2WD) |
| 18.4-28 (4WD) |
Allis Chalmers 6060 Dimensions
| Wheelbase: | 93 inches 236 cm (2WD) |
| 91.9 inches 233 cm (4WD) |
|
| Length: | 146.5 inches 372 cm |
| Width: | 68.5 inches 173 cm |
| Ground clearance: | 18.1 inches 45 cm (4WD front axle) |
| 20.4 inches 51 cm (2WD front axle) |
|
| 26.7 inches 67 cm (rear axle) |
Allis Chalmers 6060 Weight
| Shipping: | 6,100 lbs 2766 kg (2WD ROPS) |
| Operating: | 6,465 lbs 2932 kg (2WD ROPS) |
| Ballasted: | 8,945 lbs 4057 kg |
Allis Chalmers 6060 Height
| Hood: | 69.4 inches 176 cm |
| ROPS: | 107.7 inches 273 cm |
| Cab: | 103.2 inches 262 cm |
| Exhaust: | 110.2 inches 279 cm |
Allis Chalmers 6060 Electrical
| Charging system: | alternator |
| Charging amps: | 72 |
| Batteries: | 1 |
| 2 (optional) | |
| Battery volts: | 12 |
Allis Chalmers 6060 Conclusion
A tractor engine that shut down when the PTO was engaged is discussed in the article titled “Tractor engine dies when PTO is engaged.” It was decided to remove the tractor engine from service and have it repaired because it had been inoperable for a while.
When they disassembled it, they found that something had enabled the PTO when the tractor engine wasn’t supposed to be able to. This problem never recurred after fixes were made and precautions were put in place.
Final Words Allis Chalmers 6060
What does the WC stand for on an Allis-Chalmers tractor?
The Model W version designed specifically for cultivating was the WC, hence the name W + C (for “cultivating”). Later, further W variations like the WD and WF appeared (in lower numbers). Due to its excellent value, reasonable cost, and economical design features, the WC enjoyed popularity during the Great Depression.
Did Allis-Chalmers make their own engines?
Heavy-duty engines made by Allis-Chalmers (and Buda) were constructed to run on several fuel types (generally gasoline, diesel fuel, or liquefied propane gas).
Is Allis-Chalmers red or orange?
He returned to the manufacturing facility and persuaded his coworkers that orange was the best option. The colour was given the name Persian Orange after the poppy (a native crop of ancient Persia, now modern-day Iran).
What was Allis-Chalmers most popular tractor?
The Model WC became the most popular tractor ever produced by Allis-Chalmers by capitalising on the success of the company’s 1932 introduction of rubber tyres to agriculture. From 1934 through 1938, about 178,000 WC tractors were produced.
What was the biggest tractor Allis-Chalmers made?
Before its larger brother debuted in 1977, this was Allis Chalmers’ first internal big horse and the largest tractor they had ever produced. The big ol’ Allis used a 426-cubic-inch inline-six that was turbocharged, intercooled, and rated for 222 engine horsepower. It was coupled to their 20-speed Power Director transmission.